Results 1 to 7 of 7
Like Tree1Likes
  • 1 Post By ozscott

Thread: Faema Due one group continously running and buttons not responding

  1. #1
    Senior Member ozscott's Avatar
    Join Date
    Jun 2006
    Location
    BRISBANE
    Posts
    1,998

    Faema Due one group continously running and buttons not responding

    Gene Cafe Coffee Roaster $850 - Free Beans Free Freight
    Hi all. Before i open her up disconnect the loom to the pcb card and spray some Corrosion X on the little terminals are there any other tips..im concerned that the card itself might be knackered..

    Cheers

  2. #2
    Member 260zman's Avatar
    Join Date
    Apr 2014
    Posts
    45
    Hi. I'd first try disconnecting the plug on the volumetric button panel, then re switch back on and see if it still does the issue. if it does the issue will be in the main electric panel, and if not, you'll have a dodgy button.

  3. #3
    Senior Member ozscott's Avatar
    Join Date
    Jun 2006
    Location
    BRISBANE
    Posts
    1,998
    Thanks mate. Will do. Cheers

  4. #4
    Senior Member ozscott's Avatar
    Join Date
    Jun 2006
    Location
    BRISBANE
    Posts
    1,998
    Ok so yep just the card...swapped the card from the left group to the right the one i use the most and all good on that group now. Its just a case of unplugging and then peeling off the card...see attached. New one is about $75 which is sweet...gotta love being able to get parts.

    Cheers
    Attached Images Attached Images
    Dimal likes this.

  5. #5
    Member 260zman's Avatar
    Join Date
    Apr 2014
    Posts
    45
    Awesome! Great when it's a cheap (ish) fix too. Yeah, I've got a few faema and its nice being able to get parts. Be better if there were some new plastic panels available for the dues aye.

  6. #6
    Mal Dimal's Avatar
    Join Date
    Oct 2004
    Location
    Warwick, QLD
    Posts
    16,869

    Quote Originally Posted by ozscott View Post
    Ok so yep just the card...swapped the card from the left group to the right the one i use the most and all good on that group now. Its just a case of unplugging and then peeling off the card...see attached. New one is about $75 which is sweet...gotta love being able to get parts.
    Good one mate...

    Mal.

  7. #7
    Senior Member ozscott's Avatar
    Join Date
    Jun 2006
    Location
    BRISBANE
    Posts
    1,998
    Cheers Mal.

    You bet 260...perhaps get a fabrications place to make
    Us up some stainless ones....

    Cheers



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •