Results 1 to 5 of 5
Like Tree1Likes
  • 1 Post By Beanz.

Thread: Profitec Pro cup tray

  1. #1
    Senior Member flynnaus's Avatar
    Join Date
    May 2008
    Location
    Sydney
    Posts
    4,275

    Profitec Pro cup tray

    Gene Cafe Coffee Roaster $850 - Free Beans Free Freight
    Most of the Profitec range feature a removable cup tray for easy access to the water tank. I'm finding the protective rubber pads under the tray tend to stick a bit to the top of the machine and leave a mark which is only visible when the tray is removed and fairly easily removed with Cafetto.
    I'm finding the stickiness a bit of a nuisance. Anyone else experience this and if so, what have you done about it? I have 7 cups sitting on the tray most times and perhaps the weight of these is causing or contributing to the problem??

  2. #2
    Senior Member
    Join Date
    Dec 2009
    Location
    SYD
    Posts
    611
    Is it an option to plumb?

  3. #3
    Senior Member flynnaus's Avatar
    Join Date
    May 2008
    Location
    Sydney
    Posts
    4,275
    Thanks for the suggestion. I have a Pro 600 which is not plumbable but even if it was, it wouldn't be a justifiable expense to solve this problem.

  4. #4
    Senior Member Beanz.'s Avatar
    Join Date
    Apr 2009
    Posts
    253
    I have a Profitec but have not had the same issue. A very thin coating of Dow 111 and then wipe off any excess should overcome the problem
    flynnaus likes this.

  5. #5
    Senior Member flynnaus's Avatar
    Join Date
    May 2008
    Location
    Sydney
    Posts
    4,275
    Cheers. That sounds workable. I don't have Molykote but I do have some Inox that should do the job.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •