Results 1 to 4 of 4

Thread: WTB - BFC Unico Splendor body parts

  1. #1
    Member
    Join Date
    Dec 2017
    Posts
    83

    WTB - BFC Unico Splendor body parts

    Gene Cafe Coffee Roaster $850 - Free Beans Free Freight
    I think this is a massive long shot as I don't believe these machines ever really die.

    I'm looking for the following parts for the Unico Splendor.

    Drip Tray cover x2 (I'd be happy to find 1)

    Cup Warmer tray

    Perspex part that goes on top

    And the plate that the tank goes on top of that also pushes down on the switch under the tank another brand like an Expobar might also work

    like to keep them to about $150-200 for the lot if you have even one part taking up space let me know.

  2. #2
    Senior Member Jackster's Avatar
    Join Date
    Nov 2017
    Location
    Maddington, Perth. Wa
    Posts
    973
    You could get the tray water jet cut or use a folded piece of stainless mesh- with or without stainless edging.

    The Perspex can be made up too. The commercial sign makers can bend and blow it to suit. Would probably blow the budget, but you could customise to suit you.

    But good luck in your search

  3. #3
    Member
    Join Date
    Dec 2017
    Posts
    83
    Quote Originally Posted by Jackster View Post
    You could get the tray water jet cut or use a folded piece of stainless mesh- with or without stainless edging.

    The Perspex can be made up too. The commercial sign makers can bend and blow it to suit. Would probably blow the budget, but you could customise to suit you.

    But good luck in your search
    Yes I have a couple of options with getting things custom made I'm going to stop at a place tomorrow that can laser cut Stainless just to get some ideas. I have some of the parts to make patterns from and one of these machines may become fairly custom just wanted to explore this first.

    It's good to know someone can make the Perspex bit

  4. #4
    Senior Member Jackster's Avatar
    Join Date
    Nov 2017
    Location
    Maddington, Perth. Wa
    Posts
    973
    We did Perspex at highschool. I Stoughton we had a strip heater to do the bends, but I think you could manage with a heat gun and bending around a former (radiused edge)



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •