Upgraded my Mazzer Mini burrs to genuine Mazzer Super Jolly 33M burrs and I am happy with the change dosing a lot quicker after recalibrating and a slight
Certainly miles in front of previous supplier attempts!
Is the shininess of the cast cover going to show up scratches from cups over time
Another one bites the dust.
Yep, caffeine isn't for everyone.
Two or three shots at 11.00am is still keeping me awake twelve hours later but it's a price I'm willing to pay.
Yes same spots. If you have a 0.9mm drill but it will be even better.
If you search here Iím pretty sure I did a post about it a few years
Yep, I had to back the heat right off after first crack to prevent it running away.
Seems like a poor design using a grub screw to tighten a pulley onto a worm gear shaft like that. I reckon you could just get a flat spot welded onto
Just roasted the same bean- almost no warm up required with the outside temp!!
One of the first beans i purchased going back years ago now and was not disappointed. I havent ordered in some time and this thread makes me want to get
You still use 1x 5c piece in the middle. The important part is that there is not a large impression from the coin, an extremely faint one is ok. You can
I have a scale on the way for less than the cost of two hundred 5 cent pieces, but any other hints as to how I should be dosing now while I wait the 5-7
Thanks Mal, will get back with my thought when I break into them.
I'd try them in a brew first before making too many assumptions...
Some of my most enjoyable results in the cup have been with using beans that
Just type 0.01g Digital Pocket Scale in the search bar of EBay and many reasonable priced scales will pop up.