Yes that's definitely not right. It's possible you have accidentally gotten a backflush disc from a Dual Boiler machine which has no relief hole in it.
Thought I'd post this here.
I just did my first descale of my Profitec Pro 500. I didn't take it apart or anything, but just did the method
My Lelit Diana started experiencing issues in early december and I am seeking your advice. My email to Lelit to find out what
Fixed the problem BUT - NEW one has arisen. Seems like the steam ball valve is leaking from the top. I removed and checked O-ring which seemed fine, but
I brought a Breville Barista Express last week and have run 500g of coffee through the machine in this time (far more than normal
No need to have a gap between the pieces, I just drew it like that for clarity.
In my view, it is better to have the lifters angled to the axis,
Hi coffee_mum. You were sitting Rob and Cath (who own Infuse coffee) and me at a workshop Andy ran at Golden Bean when in Melbourne a few years ago.
The only time there should be any steam from the top of the boiler is just before the anti vac closes as it comes to pressure, so if there's water coming
Thanks JP, also use Adblock plus and Ghostery, they seem to take care of ads and popups, perhaps a conflict, often wondered about it, added U Block recently.
Personal Message sent.
Aaaahhhhh.....I can smell it from here! What a treat for everybody to welcome in the new year with!
Java "Ismaili yumminess!"
I need to clarify the puff was from the steam caused by the water coming out of the safety valve as it was being filled. Which potential
I would bet on scenario #1
The 'ceramic' stuff is a waterproofing compound over a plastic collar. The compound can be a product called glyptal.
That's a great add-on that will stop the vast majority of popups and ads. You can disable it on one site while leaving it operational on all others. Keep
It's definitely been leaking from the boiler seal for a while and that needs replacing but you mentioned the long filling time and puff of steam before