Have a look here: https://coffeesnobs.com.au/grinders/...legit-not.html
Java "Fake" phile
While it is true that there is certainly much there that I would love to have in my own collection that moisture you see dripping from my face is tears
So, I've just got an advert on Instagram for a Niche zero for $50aus. Super too good to be true considering the price they normally go for, but thought
So here are some "engine room" hardware pics at Golden Bean 2019.
Espresso and milk based are done on the new Rancilio along with
Yes. It seems to be an issue with Eureka grinders ( and possibly others with timed dosing).
My Atom 65 was inconsistent in dose until I had put
Thanks for the reply.... much appreciated.
Since the machine is located in a part of the kitchen without plumbing
So iíve recently purchased a Eureka Olympus 75e. Loving everything about it, however Iím curious to know everyone elseís experience
I'll be sure to tell a couple of retirees to get up sooner to flick the steam valve to keep the machine on so it doesn't turn off by the time they get
Ok, so the quick heat up time that it has and flushing water through the group aside, what's also irritating is the auto start feature being made pretty
A "nut milk bag" should also work. They're relatively inexpensive.
If you're only concerned about the ease of tamping, a tamping station that supports the portafilter by the ears rather than the base could work. Check
It does irritate me, but I have to admit it's quite astounding how quickly this machine can go from stone cold to making drinks, as long as you flush
I have a genuine Rocket bottomless and just measured 32mm from top to bottom at centre. The 20gram VST I use has at least 5mm of clearance.
Thanks, flashpixx, Iíll inquire about it
I have done some more testing and tasting this week.
One interesting observation I wanted to check was the volume of an 18 gram shot. I weighed