Weird White o-ring from AntiCalc in EM6910

[melbuurn Senior Member Find all posts View Profile Close melbuurn]

Hi Guys

I took the anti-calc filter out of tank while I gave it a clean and now have this little white o-ring type washer. I couldnt figure out where it went back in, called Sunbeam and they tell me it goes over the collar that feeds into the back of the machine (but that one is still there...

so I dont actually know where this one goes...

it is about 2 mm in thickness and about 10mm in diamter, any ideas?

Cheers Melbuurn

[A_M Guest Find all posts View Profile Close A_M]

Re: Weird White o-ring from AntiCalc in EM6910

Hi Guys

I took the anti-calc filter out of tank while I gave it a clean and now have this little white o-ring type washer.  I couldnt figure out where it went back in, called Sunbeam and they tell me it goes over the collar that feeds into the back of the machine (but that one is still there...

so I dont actually know where this one goes...

it is about 2 mm in thickness and about 10mm in diamter, any ideas?

Cheers Melbuurn

Comes down to What was said Vs what was Intended Vs what was heard..

Inside the water tank.. there is a little spigot that the Anti Calk filter fits on to..

That is where that small Si o-ring goes ON to..

The filter Spigot has a taper and when clicked into place the Taper and the O-ring match up to form a seal..

Trust this helps... 8-)

CS Sunbeam support staff.. Donations to teh FC fund always welcome...