If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Original Greenman Corretto, Corretto twin paddle MkII, Computer hooked up to Corretto, Sunbeam EM450 set for filter and pourover, bean cooler, vacuum to clean up chaff, computer chair to sit in and monitor roasts in comfort, bean cupboard with 53.5kg of greenies at the mo!
Future addition of a 5kg roaster but all of my hints and pleas are falling on deaf ears so far, hopefully persistent persuasion will win through in the end:-/ :
In the shed is corretto roaster and commercial fan for cooling, spare gaggia single group machine, spare grinder, various coffee machine parts and accessories - and 30kg of green beans waiting for a solid workout!
looking rather unloved wraped up under the bench
Carimali 2 group "gamma"
things in various stages of development
KKTO hybrid with bean dump and cooling (mostly in plan stage)
Bread maker with bean dump tube and cooling tray (at prototype stage)
2 poppers
1 toaster oven (free) was thinking Behmor thing?
lots of wires, motors, stainless steel, and nuts and bolts for more "ideas"
I have resisted the urge for a little while........ its hard..... i want a real lever as well....
In the shed the only thing is my 3grp Izzo under wraps until the next job.
Under the back porch is the partially stripped Z9 Lever awaiting a boiler clean, chassis paint and reassembly.
In the kitchen and lounge :
Micro Cimbali lever paitiantly waiting a full strip & clean, must get to it after over a year of stalling :-[
On the kitchen bench various cleaned parts of the Z9
On the kitchen table parts to make my popper variable heat controlled, also a Ramp controller to play with some more prior to fitting to my Hottop.
There is also on the kitchen floor my 2 DRM and Climax Grinders, plus a dozen or so syphons and the Pavoni ..........
Originally posted by 2D382A31303C590 link=1272885060/10#10 date=1272894285
Originally posted by 5F70797B6C537F707F797B737B706A1E0 link=1272885060/1#1 date=1272885831
Check ya PM
Geez AM I do wonder what you have in your shed sometimes
At present a:
1: 2 group KlIIB and
2: a BZ99 (plumbed in)
- both NOW rebuilt..
Projects in progress.
A: EM69AMB X 1
B: 3 x EM6900 - Parts
C: 1 X EM6910 - Possible EM69AMB unit for a mate or two
D: 2Kg old Ball type French gas roster
E: ~2008 Diadema Unico Splendor
Want:
1: A true lever machine for teh deck to assist with cupping my KKTO roasts...
2: A spare grinder
Leave a comment: