Announcement

Collapse
No announcement yet.

help modding a PF

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help modding a PF

    hey lads, this is what i have done so far: i have the breville 800 as my backup machine, decided to cut the bottom out of the PF big mistake as the filter basket is double walled with a single outlet hole of under .5mm. Now the shot belts out in a jet stream. seems in the base of the PF was a retarder of sorts....whats the best plan of attack now? open up more outlets or get a new PF?

  • #2
    Re: help modding a PF

    notification,,,

    Comment


    • #3
      Re: help modding a PF

      you should be able to get a non pressurised basket for the breville and then your naked handle should do the job

      Comment


      • #4
        Re: help modding a PF

        yep, may just go that way, are there generic baskets around or is it a breville i have to look for...

        Comment


        • #5
          Re: help modding a PF

          Just cut the single-hole bottom off the basket and then you have an unpressurised basket and a bottomless pf and you are good to go.

          Do it carefully as the screen may only be a mm or so behind the single-hole bottom.

          Greg

          Comment

          Working...
          X