Re: help modding a PF
Just cut the single-hole bottom off the basket and then you have an unpressurised basket and a bottomless pf and you are good to go.
Do it carefully as the screen may only be a mm or so behind the single-hole bottom.
Greg
Announcement
Collapse
No announcement yet.
help modding a PF
Collapse
X
-
Re: help modding a PF
yep, may just go that way, are there generic baskets around or is it a breville i have to look for...
- Flag
Leave a comment:
-
Re: help modding a PF
you should be able to get a non pressurised basket for the breville and then your naked handle should do the job
- Flag
Leave a comment:
-
help modding a PF
hey lads, this is what i have done so far: i have the breville 800 as my backup machine, decided to cut the bottom out of the PF
big mistake as the filter basket is double walled with a single outlet hole of under .5mm. Now the shot belts out in a jet stream. seems in the base of the PF was a retarder of sorts....whats the best plan of attack now? open up more outlets or get a new PF?
Tags: None
- Flag

Leave a comment: