Announcement
Collapse
No announcement yet.
Single Boiler - Stupid Question
Collapse
X
-
Hi Brad, no its not a stupid question unless its the third time its been asked, IMHO :-)
As someone who moved from an HX to a SBDU VBM, there is a certain amount of learning, but if you're running the machine for shots/backflushing then the pump will automatically refill the boiler. As you surmised, the steaming function does need your manual intervention to refill.
Once you've got that down, no dramas.
- Flag
Leave a comment:
-
Single Boiler - Stupid Question
Hi,
I’ve had a couple of Sunbeams over the years (6910 & 7000) and have picked up a Lelit 41temp. I understand that using steam will deplete the boiler and I refill it afterwards by pumping water through the “hot water” setting.
I chemically back flushed the machine today and by the end of it thought I would have used quite a bit of water from the boiler. But to my surprise it only took a second for water to stream out indicating that bugger all boiler water had been used.
Do I need to refill the boiler after shots and back flushing or only after steaming milk?
Many thanks
BradTags: None
- Flag

Leave a comment: