If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I normally go through a quick pre-heat, aim for a reasonably rapid ramp up (p1), then taper off on p3 and pull it as soon as the rolling crack starts, or just before.
I can't advise on Behmor specifics, but this sounds like the same approach I'd use with a corretto
Morning fellas/ ladies, i'm going to roast up some Ardi soon in the Behmor, aiming for filter roast so around the CS8/9. Im wondering if anyone has any advice on roasting this particular bean, any profile that seems to get the best out of the bean?
I normally go through a quick pre-heat, aim for a reasonably rapid ramp up (p1), then taper off on p3 and pull it as soon as the rolling crack starts, or just before.
I'm a massive fan of this bean when i buy it from a local roaster, just blue berries for days, so really want to try nail it!
Leave a comment: