Announcement

Collapse
No announcement yet.

Heatsnob Graph/Behmor Newbie Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Andy
    replied
    Originally posted by crouch153 View Post
    Hi,

    First time using heatsnobs temp logger.
    Here is the graph from the cleaning cycle. (whoops not allowed to upload jpg?)
    Not quite what I was expecting.


    1: the temp rises steadily to 150 them drops to 80c. Why?

    2: Temp remains constant till Behmor starts cooling cycle, upon which it actualy increases.Is this a normal?

    3: What does the blue line represent/

    Thanks.
    Get your forum post count over 5 and you can post images
    (keeps the spammers out, I'm sure you understand)

    Hard to guess what you are seeing without a picture but... The HeatSnob just reports what it sees!

    1: On a Behmor cleaning cycle the fan speed increases and will draw more cold air in than the start of the cycle (is my guess).
    2: Cooling cycle is the same, temp will increase initially because the fans draw more air though.
    3: Blue line at the bottom is the graph of degrees per minute.

    Leave a comment:


  • crouch153
    replied
    Thank You for your response , after 2 more hours of searching old posts found same answer for temp drop , still do not know whawt blue line represents

    Leave a comment:


  • Mb21
    replied
    Where is the temp probe located?
    what type of probe thermocouple or bead?
    what time does the temp drop and what batch size and profile are you using?

    my bet would be the fan turns on and draws some of the heat out. Happens around 40% of roast time if I remember correctly

    Leave a comment:


  • crouch153
    started a topic Heatsnob Graph/Behmor Newbie Help

    Heatsnob Graph/Behmor Newbie Help

    Hi,

    First time using heatsnobs temp logger.
    Here is the graph from the cleaning cycle. (whoops not allowed to upload jpg?)
    Not quite what I was expecting.


    1: the temp rises steadily to 150 them drops to 80c. Why?

    2: Temp remains constant till Behmor starts cooling cycle, upon which it actualy increases.Is this a normal?

    3: What does the blue line represent/

    Thanks.
Working...
X