Originally posted by 6B6661603D6B760F0 link=1242678911/0#0 date=1242678911
I just happened to be given one to repair / dump.. See pic below...
The magnet its self... Should not Fail... But it could get stuck and thus not trigger the hall effect sensor.
The one I had actually had the thermo block leaking and in fact was leaking almost all the way around... New o rings and some other general maintenance and it appears to be now working fine..
BOT: As to the magnet, it could be the sensor (see white object l/h side of the pic) / the connector and or the board.
These sensors do fail... You could check the sensor directly, they are usually OC or NC, thus you could measure it and with a strong magnet or teh water tank one... see it is responds...
I also found that the sensor wires cam off very easily... (I got caught)
If the board... Sorry, not much you can do...


Leave a comment: