Announcement

Collapse
No announcement yet.

The issue of the steam of sunbeam 6910

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • The issue of the steam of sunbeam 6910


  • #2
    When was the steam thermoblock last descaled?

    Comment


    • ThorneFeng
      ThorneFeng commented
      Editing a comment
      thank you for reply, I think never...idk how to do it...

  • #3
    Sounds like an airlock in the steam system. Open the hot water tap at the same time as the steam tap and wait. if you don't get steam flow within 30 seconds, remove and refit the water tank several times rapidly. This can sometimes assist to get a bit of water into the lines.

    Comment


    • ThorneFeng
      ThorneFeng commented
      Editing a comment
      thank you for the answer, i tried it but still not work only sounds...

    • ThorneFeng
      ThorneFeng commented
      Editing a comment
      finally, Whilst attached to the machine fill the reservoir to the maximum line, then open the both taps... the stem was coming out !!!
Working...
X