Announcement

Collapse
No announcement yet.

The issue of the steam of sunbeam 6910

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ThorneFeng
    commented on 's reply
    finally, Whilst attached to the machine fill the reservoir to the maximum line, then open the both taps... the stem was coming out !!!

  • ThorneFeng
    commented on 's reply
    thank you for the answer, i tried it but still not work only sounds...

  • noidle22
    replied
    Sounds like an airlock in the steam system. Open the hot water tap at the same time as the steam tap and wait. if you don't get steam flow within 30 seconds, remove and refit the water tank several times rapidly. This can sometimes assist to get a bit of water into the lines.

    Leave a comment:


  • ThorneFeng
    commented on 's reply
    thank you for reply, I think never...idk how to do it...

  • level3ninja
    replied
    When was the steam thermoblock last descaled?

    Leave a comment:


  • ThorneFeng
    started a topic The issue of the steam of sunbeam 6910

    The issue of the steam of sunbeam 6910

Working...
X