Hi Guys
Donned the Hazmat suit and pressed the ant-vac valve - this is definintely where it has been coming from - much thanks
) The pressure reads 1.2 bar after the heating cycle, slowly drops to about 1, then heats again. This being my first "real" machine I am not sure if this is normal or not :-? It never seems to get above 1.2 even when pulling a shot.......
) The pressure reads 1.2 bar after the heating cycle, slowly drops to about 1, then heats again. This being my first "real" machine I am not sure if this is normal or not :-? It never seems to get above 1.2 even when pulling a shot.......


Leave a comment: