Announcement

Collapse
No announcement yet.

Bezzera B2000 left hand groip causing power trip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • IPDiscuss
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    Ok, sorry for the long wait on update, but turned out to be corrosion n the coil indeed.

    All good after replacing the solenoid coil.

    Leave a comment:


  • IPDiscuss
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    Hmm, rook a while to get a new solenoid coil, but came in today. Will see tomorrow how it goes.

    Leave a comment:


  • Mischa
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    yeah the only possibilities would be the touch pad, the main board or the solenoid

    Leave a comment:


  • IPDiscuss
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    Originally posted by 5B7F65757E77160 link=1317857282/2#2 date=1317862331
    Yep most likely the solenoid. take it off and check if its shorted with a multimeter, but its almost definitely the solenoid,

    Thanks, I know its not the boiler or element, as apart from this problem, it runs fine. Ill pull the solenoid off and test it.

    Leave a comment:


  • Mischa
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    Yep most likely the solenoid. take it off and check if its shorted with a multimeter, but its almost definitely the solenoid,

    Leave a comment:


  • iaindb
    replied
    Re: Bezzera B2000 left hand groip causing power trip

    I had the same symptoms once from a Boema 2 group. It turns out the water inlet was turned off so the boiler was getting too hot, and since we favoured the left boiler it emptied sooner...

    Could also be a faulty element.

    Its a wild guess, I dont know much about these things!

    Leave a comment:


  • IPDiscuss
    started a topic Bezzera B2000 left hand groip causing power trip

    Bezzera B2000 left hand groip causing power trip

    Hi

    My B2000 2-group has started shorting recently when activating the left hand group. I have checked the button panel and it works fine when I try it on the other group (by switching the cables in the Brain Box), Could a faulty solenoid valve cause a short? Basically the machine works fine, but as soon as I try to use the left hand group, it trips the power.
Working...
X