If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Seriously blokes there is not much of value in the owner booklets.
Usually,
a) instructions on how to fit up the machine from new
b) instructions on how to programme the touch pads
c) instructions on how to regenerate the water softener / depurator,
and precious little else. They do not tell you how to use the machine, how to make coffee, or how to trouble shoot much if anything other than to advise you to call for service if something is not operating as it should.
a) is usually a oncer and the trade fit up is done by someone with experience so not required in reality
b) a dangerous thing to leave with cafe staff unless you dont mind anyone and everyone changing the programmes daily according to unqualified personal whims and
c) no one in cafes ever does that with the old style water softener /depurators that used to be supplied with the machines because its "too hard".
All in all, the booklets have not much of any real value in them, are never used, and disappear.
If you have a service problem, you probably wont find anything in the booklets to help, and you are better off simply starting your own topic here with a specific question, asking for assistance.
Thanks for the response - but in truth when it comes to these machines I am a newbie - so even programming the buttons is "hard" for me!
Technically Im not a complete idiot (see my other post on the hot-water pipe) - Ive managed to get it wired in and plumbed myself (safely) and its all working.... but its always that thought at the back of my mind of "did I do it the way its supposed to be done.... and how DO I program those darned buttons!" (guess my background as a Project Manager is showing through! )
If there is a guru on here perhaps a generic idiots FAQ could be put together?
hi ccc2,
Im hoping you wont mind my imposing on your good will by asking if you could help with a manual for a san marino Lisa SMSA-SS/2 Group? many thanks in advance
I understand these are SUPER old offers, but I'm hoping someone still has and can grant me access to a techy manual or at least some exploded diagrams which are relevant to a 2grp San Marino - Lisa.
Please help!
Comment