Originally posted by Caffeinator
View Post
Announcement
Collapse
No announcement yet.
Izzo Alex Duetto II discussion thread
Collapse
X
-
I’ve sent a message directly to Izzo themselves so I’ll see what they come back with; no doubt they will direct me to Casa Espresso too. Today the brew boiler temperature went through the roof and I had steam coming out of the brew head. No coffee for me today... I will start with replacing the PID and go from there because I can’t read it to see what is happening at the moment.
- Flag
-
Chris from TC is sending me a new PID and thermocouple so I’ll start there. Could be the SSR but I need to fix the PID first to eliminate that. It’s hard to tell but I think I have an error A1 showing, hence the new temp probe for the brew boiler.Originally posted by Caffeinator View PostOr could also be at the SSR
- Flag
Comment
-
First crack or nothing
- Nov 13
- 3435
- Sydney (West)
- Filter or long black: clean with crisp acidity
- Send PM
There's a few options out there. Some have replaceable surge units on case they get used up. Best practice is to have the whole house on a larger surge diverter and then each piece of critical equipment on a smaller local one. Different size surge diverters work for different size surges.
- Flag
Comment
-
Unfortunately the GPO the machine is plugged into is a quad and I haven’t found a surge protected one yet.Originally posted by Dimal View PostYou can get single and double Surge Protected GPOs such as the one pictured...
Not obtrusive at all.
Mal.
[ATTACH=CONFIG]25287[/ATTACH]
The new PID and brew boiler thermocouple are installed and it seems I’ve cured the problem. I will be 100% sure when the machine has been allowed to idle for 30 minutes or so. Thanks again to Chris @ TC; I prefer the white LEDs too.
- Flag
Comment



Comment