Announcement

Collapse
No announcement yet.

KLUB T2 2 grp machine - Rebuild ???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: KLUB T2 2 grp machine - Rebuild ???

    More pics.

    Basic but finished.. Knobs is knobs and have 2 x steam and 1 x hot water..

    Now to see what happens...





    Comment


    • #32
      Re: KLUB T2 2 grp machine - Rebuild ???

      UPDATE - for those interested.

      While this unit was rebuilt to gain some extra hands on and a better understanding of simple machines - it is and was surplus to my personal needs and I do not have the luxury of being able to store for CS gatherings..

      Thus my efforts have been completed and I am assuming; there is a good chance that some will get to play on the 6th of June at the SEQ CS gathering...


      Now I did do a post in the FS section however:

      The forsale section is for CS’rs to sell their own equipment to other CS’rs If you are restoring and selling things then you need to be a site sponsor.

      AND

      As a rule people sell things on the CS pages for bottom dollar to another CS’r, not for top dollar offers over “x” or only if it doesn’t sell on ebay.

      Now I am not a Sponsor... Have no intent to make $$$ / profit from CS members..

      That being said; if you wish to see how much and if any $$$$ finally get passed on to Fair Crack ( http://faircrack.net/) ; then a little research on a well know auction site will allow you to monitor the progress and my commitment to first crack.

      Note:

      The stated bottom line; was my all up expenses due to having to pay FULL retail $$ for parts etc Tis unfortunate but I do not have any deals with parts suppliers OR it would have been much lower. The manual efforts and minor bits and pieces etc was all donated by my wife  ;D



      Comment


      • #33
        Re: KLUB T2 2 grp machine - Rebuild ???

        Originally posted by 16393032251A36393630323A323923570 link=1270002934/31#31 date=1273620743
        UPDATE - for those interested.

        While this unit was rebuilt to gain some extra hands on and a better understanding of simple machines - it is and was surplus to my personal needs and I do not have the luxury of being able to store for CS gatherings..

        Thus my efforts have been completed and I am assuming; there is a good chance that some will get to play on the 6th of June at the SEQ CS gathering...


        Now I did do a post in the FS section however:

        The forsale section is for CS’rs to sell their own equipment to other CS’rs If you are restoring and selling things then you need to be a site sponsor.

        AND

        As a rule people sell things on the CS pages for bottom dollar to another CS’r, not for top dollar offers over “x” or only if it doesn’t sell on ebay.

        Now I am not a Sponsor... Have no intent to make $$$ / profit from CS members..

        That being said; if you wish to see how much and if any $$$$ finally get passed on to Fair Crack ( http://faircrack.net/) ; then a little research on a well know auction site will allow you to monitor the progress and my commitment to first crack.

        Note:

        The stated bottom line; was my all up expenses due to having to pay FULL retail $$ for parts etc Tis unfortunate but I do not have any deals with parts suppliers OR it would have been much lower. The manual efforts and minor bits and pieces etc was all donated by my wife  ;D


        So basically, what we have here is an ad for the sale on an auction site? Hmmm.

        Comment


        • #34
          Re: KLUB T2 2 grp machine - Rebuild ???

          Originally posted by 24050E0E0913600 link=1270002934/32#32 date=1273623101
          So basically, what we have here is an ad for the sale on an auction site? Hmmm.
          Give the guy a break. Hes not selling to make a living and hes *choosing* to donate a portion of the profits to faircrack. Angermanagement is one of the biggest contributors to this forum and he doesnt get paid a cent for that.

          Comment


          • #35
            Re: KLUB T2 2 grp machine - Rebuild ???

            She has come up beautifully AM, if I had the space Id seriously consider it.  I noticed it a couple of days ago on that auction site.  I knew it had to be a CSer but didnt realise it was you as I hadnt been following the thread.

            Originally posted by 42404C44444A4D50230 link=1270002934/33#33 date=1273623459
            Angermanagement is one of the biggest contributors to this forum and he doesnt get paid a cent for that.
            Couldnt agree more, not to mention all the free repairs hes done for other CS members. Hes lucky I dont live in Brissy or Id probably try to move into his shed.

            Comment


            • #36
              Re: KLUB T2 2 grp machine - Rebuild ???

              Agreed, hes helped me out a lot. Also with the fact that AM is donating to fair crack should be supported by CS. Also the fact that hes saving the planet by recycling...

              Yes its on an auction site, but thats life, it does exist and a lot of CSer use it by choice or necessity.

              Good luck with the sale AM.

              Comment


              • #37
                Re: KLUB T2 2 grp machine - Rebuild ???

                Originally posted by 484943504E4B51220 link=1270002934/34#34 date=1273624030

                lucky I dont live in Brissy or Id probably try to move into his shed.
                LOL Ya can have teh cubby house... I get banished to the shed , but no room so end up in the back of the car...

                Originally posted by 66474C4C4B51220 link=1270002934/32#32 date=1273623101
                So basically, what we have here is an ad for the sale on an auction site? Hmmm.
                Every one has an opinion... Hmmmmmm

                This post was for those who are interested in equipment and refurbs and what the final outcome might be..

                Hard to deny that auction place; when advise by Admin - ""You can always just sell on ebay, the local paper or somewhere else."

                To deny it even exists; means closing an opportunity to do better and offer more. A true quality and customer approach would mean sponsors would be involved and things such a a dozen grinders going for a song might be managed better. No one complained about those blatant posts and references to cheep deals - Opps AM was not involved so the detect AM post search was not triggered :-X

                Originally posted by 6E4341474A4B4F220 link=1270002934/35#35 date=1273624913
                Yes its on an auction site, but thats life, it does exist and a lot of CSer use it by choice or necessity.
                Yep... Problem is that some sellers on that place have a Shop front and it is their only one so;

                1: If I want a NEW transformer from the distributor ( GiCar repair = $5 parts) I have one option - That auction place.

                2: I need to let another user know... Oops PM time...

                Like drugs, Booze and other crap... Prohibition just forces it underground and gives others the real power... Work with it in a responsible manner and a whole new level of respect would come to the plate 8-)


                Comment


                • #38
                  Re: KLUB T2 2 grp machine - Rebuild ???

                  Originally posted by 113C3E383534305D0 link=1270002934/35#35 date=1273624913

                  Agreed, hes helped me out a lot.  

                  Also with the fact that AM is donating to fair crack should be supported by CS.  

                  Also the fact that hes saving the planet by recycling...
                  Thanks  

                  Hey with the first crack links on that place... Even if the item remains at home for a while to come... Others outside of CS may get to know a little more...

                  Shame a number of the pics attached to the blogs are not working  http://faircrack.net/

                  (E-mail sent to blog admin)

                  Besides, In addition I could add the first crack web address to the Roof and then be the bigest promoter of first crack out side of Andy  8-)

                  In addition I also subscribe to http://www.ozrecycle.com/ and it is all about recycling and NO costs.. I forget the lady CS - from the Blue Mountains ??? that put me onto it.. But it is great to help out.

                  Opps - Community spirit again  :   Not allowed.


                  Elements and what ever - just give me a heads up.

                  Comment


                  • #39
                    Re: KLUB T2 2 grp machine - Rebuild ???

                    Originally posted by 2F2E2437292C36450 link=1270002934/34#34 date=1273624030
                    Re: KLUB T2 2 grp machine - Rebuild ???
                    Reply #34 - Today at 10:27am She has come up beautifully AM, if I had the space Id seriously consider it.I noticed it a couple of days ago on that auction site.I knew it had to be a CSer but didnt realise it was you as I hadnt been following the thread.

                    ACog wrote on Today at 10:17am:

                    Angermanagement is one of the biggest contributors to this forum and he doesnt get paid a cent for that.  
                    I second that....    Give him a break.

                    And while Im at it, having previously been on the receiving end of random censorship,  honestly, who gives a sh*t if there is any reference to that not to be mentioned auction site.    In my humble opinion, such a heavy handed anal retentive attitude to not being allowed to mention or link to evilbay is a crock.   >

                    Comment


                    • #40
                      Re: KLUB T2 2 grp machine - Rebuild ???

                      Originally posted by 6D607D6E7B3E3D3C0F0 link=1270002934/38#38 date=1273647432
                      I second that....  
                      Long time no read..

                      So how did ya rebuild end up...

                      No offence intended; but your experience and issue of wiring and the GiCar controller often comes to mind and used as an example..  Trust ya OK with that and not much ya can do if NOT  

                      Ya would be surprised how many look at the level sense and other connections BUT FORGET the EARTH return... Or do not follow it back to the actual termination.


                      Would I do a commercial multi or single group rebuild again...  MAYBE  

                      1: Simple
                      2: Just a bit of elbow grease
                      3: Elements may be a pain

                      HOWEVER:


                      The Rotary pump is the KILLER - if trying to manage $$$....  

                      Bearings (Have two spare now) can be dirty etc and make noise... Can be fixed...  
                      Vanes can be sticky - Can be fixed  
                      Internal water seal between the inlet and the drive bearing stuffed - GET a new PUMP  :-X


                      OUTCOME:

                      Unless the machine is highly desirable and or has special meaning then think carefully!

                      Comment


                      • #41
                        Re: KLUB T2 2 grp machine - Rebuild ???

                        Originally posted by 0A252C2E39062A252A2C2E262E253F4B0 link=1270002934/39#39 date=1273649653
                        Long time no read..

                        So how did ya rebuild end up...

                        No offence intended; but your experience and issue of wiring and the GiCar controller often comes to mind and used as an example..Trust ya OK with that and not much ya can do if NOT

                        Ya would be surprised how many look at the level sense and other connections BUT FORGET the EARTH return... Or do not follow it back to the actual termination.
                        Hi AM. Of course, no problem at all.

                        The Cimbali is still going strong, making nice Limu shots for me everyday. The only other problem I found was one of the fluidotech vibe pumps is not making any pressure so am about to order a replacement. But still surviving fine on just one group for the time being.

                        Also need to hurry up and finish off the KKTO and start roasting the bean stash in the cupboard... :

                        Comment


                        • #42
                          Re: KLUB T2 2 grp machine - Rebuild ???

                          Originally posted by 6469746772373435060 link=1270002934/40#40 date=1273658335
                          Originally posted by 0A252C2E39062A252A2C2E262E253F4B0 link=1270002934/39#39 date=1273649653
                          Long time no read..

                          So how did ya rebuild end up...

                          No offence intended; but your experience and issue of wiring and the GiCar controller often comes to mind and used as an example..Trust ya OK with that and not much ya can do if NOT

                          Ya would be surprised how many look at the level sense and other connections BUT FORGET the EARTH return... Or do not follow it back to the actual termination.
                          Hi AM.  Of course, no problem at all.  

                          The Cimbali is still going strong, making nice Limu shots for me everyday.    The only other problem I found was one of the fluidotech vibe pumps is not making any pressure so am about to order a replacement.  But still surviving fine on just one group for the time being.

                          Also need to hurry up and finish off the KKTO and start roasting the bean stash in the cupboard...  :
                          Great to hear...

                          Feel free to disconnect and send teh vibe through to me :-)

                          Aprox 80% success


                          Rebuilds teach ya lots about things... Often nothing to do with coffee either :-)


                          KLub T2 looks lonely in teh shed.. And bloody ido geckos are crapping all over the place and it... Will need to give another polish soon....

                          Comment


                          • #43
                            Re: KLUB T2

                            Hi All,

                            Does anyone know how to program the volume flow of a T2 Klub machine?

                            Thanks heaps
                            Katie

                            Comment

                            Working...
                            X