Announcement

Collapse
No announcement yet.

gaggia pump .....Im new and know not a thing so help me

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gaggia pump .....Im new and know not a thing so help me

    Got a gaggia machine think its a old e90? but here goes it had no pump
    has the cable with 5 wires coming out of it . The people I got it of keeped the pump for there new machine .
    So what pump do I need and a wiring diagram
    its a 240 volt . 2 group head
    Any help .......thanks feebee

  • #2
    Re: gaggia pump .....Im new and know not a thing so help me

    Welcome feebee.... [smiley=thumbsup.gif]

    Have you checked out the User Manual for this machine? Can be downloaded from here...

    http://www.gaggia.com/dam/bo/allegat..._evolution.pdf

    Cheers
    Mal.

    Comment


    • #3
      Re: gaggia pump .....Im new and know not a thing so help me

      thanks for placing my post in the right spot
      link not working
      thanks feebee

      Comment


      • #4
        Re: gaggia pump .....Im new and know not a thing so help me

        Originally posted by 606363646363060 link=1296906358/2#2 date=1296914421
        link not working
        Try again; it took me a couple of goes.
        If you have no luck PM me your email address and Ill send it to you.

        Comment


        • #5
          Re: gaggia pump .....Im new and know not a thing so help me

          Still can not get the link to work email pfd would be good .
          Have have electrician look at it think he knows how it works but does not want to blow it up without wiring diag .
          any help would be good
          it has 5 wires going to the pump
          just need to know how the 5 wires hook up which goes where
          red black white blue gray green
          green = earth
          red =
          white =
          blue =
          black =
          gray =
          thanks feebee.

          Comment


          • #6
            Re: gaggia pump .....Im new and know not a thing so help me

            Wiring diag dose not show the 6 wires Only 3. There must be some one out th ere that knows how they wire these.

            Comment


            • #7
              Re: gaggia pump .....Im new and know not a thing so help me

              Originally posted by 575454535454310 link=1296906358/5#5 date=1297499570
              Wiring diag dose not show the 6 wires Only 3. There must be some one out th ere that knows how they wire these.
              Get an Electrician before some one gets hurt. 240V !!!!

              Comment


              • #8
                Re: gaggia pump .....Im new and know not a thing so help me

                Tried 3 no one wants to wire until they have some idea how the machine works one said if i can give him a idea on how it should be wired.. As where i live no coffee machine repair man around here. So if you know a electrician with a wiring diag it would be nice.
                The wiring on the net only show 3 wires some one may have modified the machine this is why the electrician wont wire it with out a diag

                Comment


                • #9
                  Re: gaggia pump .....Im new and know not a thing so help me

                  What is ya location

                  Can you send pics ?

                  Comment


                  • #10
                    Re: gaggia pump .....Im new and know not a thing so help me

                    i was thinking you need to follow all the wires back to the source, figure out where they are going and why...

                    are all 5 coming out of one "cord" or are they seperate.

                    5 just seems very strange and the pump should just have the 3 two power and one earth.

                    pics of them coming out and there source will help

                    Comment


                    • #11
                      Re: gaggia pump .....Im new and know not a thing so help me

                      Originally posted by 676B626F6F660A0 link=1296906358/9#9 date=1297512029
                      5 just seems very strange and the pump should just have the 3 two power and one earth.
                      It may have a separately wired Start/Run Capacitor configuration.

                      This is NOT a job for the unqualified and unlicensed. Print out the PDF manual above, grab an electrician and he/she will be able to work it out for you. If they cant do this then Id be worried about their bona fides..... :-?

                      Mal.

                      Comment


                      • #12
                        Re: gaggia pump .....Im new and know not a thing so help me

                        I have a wiring diagram of gaggia grinder, it looks like it may be same as rotary pump motor

                        http://lmgtfy.com/?q=Wiring+MDF_V230_Sae0244_Rev00

                        2 wires to motor, 2 wires to start capacitor, 1 wire to earth

                        hope this helps.

                        Comment

                        Working...
                        X