Cheers Mal.
You bet 260...perhaps get a fabrications place to make
Us up some stainless ones....
Cheers
Announcement
Collapse
No announcement yet.
Faema Due one group continously running and buttons not responding
Collapse
X
-
Good one mate...Originally posted by ozscott View PostOk so yep just the card...swapped the card from the left group to the right the one i use the most and all good on that group now. Its just a case of unplugging and then peeling off the card...see attached. New one is about $75 which is sweet...gotta love being able to get parts.
Mal.
- Flag
Leave a comment:
-
Awesome! Great when it's a cheap (ish) fix too. Yeah, I've got a few faema and its nice being able to get parts. Be better if there were some new plastic panels available for the dues aye.
- Flag
Leave a comment:
-
Ok so yep just the card...swapped the card from the left group to the right the one i use the most and all good on that group now. Its just a case of unplugging and then peeling off the card...see attached. New one is about $75 which is sweet...gotta love being able to get parts.
Cheers
- Flag
Leave a comment:
-
Hi. I'd first try disconnecting the plug on the volumetric button panel, then re switch back on and see if it still does the issue. if it does the issue will be in the main electric panel, and if not, you'll have a dodgy button.
- Flag
Leave a comment:
-
Faema Due one group continously running and buttons not responding
Hi all. Before i open her up disconnect the loom to the pcb card and spray some Corrosion X on the little terminals are there any other tips..im concerned that the card itself might be knackered..
CheersTags: None
- Flag

Leave a comment: