Announcement

Collapse
No announcement yet.

Boema 1964 twin lever

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brendogs
    replied
    If you have any left over parts I have one collecting dust in pieces which is sitting underneath a stack of stools.

    I started it and have been too busy to finish it 😫

    Leave a comment:


  • paulcassidy
    replied
    thanks sniff will do I have seen some of his work great stuff.

    Leave a comment:


  • SniffCoffee
    replied
    Hi Paul and welcome to Coffeesnobs

    You might try sponsor Rick - the Coffee Machinist - he's a bit of a Boema / lever guru.

    Regards

    Sniff

    Leave a comment:


  • paulcassidy
    started a topic Boema 1964 twin lever

    Boema 1964 twin lever

    Hi All I have recently just joined and I have also picked up a lovely 1964 twin lever machine. this maching is in good condition but needs a few part changes. I am not michnical minded at all but love these old levers and am going to have a go. so any advice on the list below would be great. Changing springs,and cleaning out the boiler. also if anyone knows where i can get a manuel that would be great, I have already asked boema but they dont have any.thanks in advance.
Working...
X