I have an interesting issue with my gs3; I'd like to know what people with experience operating / servicing these machines think could be the cause.
So, it's under 12 months old; runs from the tank; I have Strada modified it recently and it worked perfectly until, well, it didn't for no apparent reason
The problem is; after the machine automatically turns on in the morning, I go to pull the first shot, the pump won't start. The microswitch audibly clicks but nothing happens. However if I run the hot water tap, the pump starts and it refills the boiler. After that I can pull a shot happily and the problem won't occur again.
In my mind it's a PCB/logic board issue but I don't / haven't looked for an electrical schematic to assist my fault finding,
I welcome others to chime in with possible causes of this odd behaviour.
So, it's under 12 months old; runs from the tank; I have Strada modified it recently and it worked perfectly until, well, it didn't for no apparent reason
The problem is; after the machine automatically turns on in the morning, I go to pull the first shot, the pump won't start. The microswitch audibly clicks but nothing happens. However if I run the hot water tap, the pump starts and it refills the boiler. After that I can pull a shot happily and the problem won't occur again.
In my mind it's a PCB/logic board issue but I don't / haven't looked for an electrical schematic to assist my fault finding,
I welcome others to chime in with possible causes of this odd behaviour.
Comment