If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Which exact M28 model do you have as there are several versions. There's no pictures in your post. You'll need to make a few more posts before you can attach pictures. When you post your pictures, including one of the business side of the machine would be helpful for identification purposes.
Java "Cimba!" phile
The machine is an M28 Select DT/2. Thanks for any help you can provide.
Which exact M28 model do you have as there are several versions. There's no pictures in your post. You'll need to make a few more posts before you can attach pictures. When you post your pictures, including one of the business side of the machine would be helpful for identification purposes.
I live in Alaska and purchased a bit of a basket case. The machine appears to have been exposed to subzero temperatures at some point, and then partially taken apart. I have been able to fix most the items, but I am completely at a loss as to the wiring for the boiler. The wires were pulled off and not labeled. I will be wiring the unit up to 240 V single phase power. I have attached images of the wiring diagram inside of the cover and also the wires near the boiler. Thanks for any insight you can provide. Jim
Leave a comment: