Announcement
Collapse
No announcement yet.
La Cimbali M28 Basic boiler overfills when using the hot water dispener
Collapse
X
-
Yes, it's quite work of art.
The water is coming out of the pressure relief valve on top of the boiler.
I'm suspecting it's the mixer valve, I removed the screws with alan wrench but looks like it connected somehow inside the boiler, does it just come out or there is something holding it inside the boiler?
Sam
- Flag
Leave a comment:
-
Gday samhajymailcom.
Im not sure if this is what you mean, however I had a continue dripping overflow issue recently where water slowly ran out of an overflow pipe into water catcher behind the front panel.
I purchased a similar machine (M22) from a garage sale - it had been sitting around for awhile unused. Anyhoo, I took apart the solenoid valve near the leak and put it back together and bingo, the leak stopped.
I dont know much about these machines, however im glad ive got it. Looks like a work of art inside does it not?
- Flag
Leave a comment:
-
La Cimbali M28 Basic boiler overfills when using the hot water dispener
I have La Cimbali M28 Basic, bee working on fixing to get it to work been in storage for 6 months.
Initially the boiler was over filing when connected to direct water connection then power, I found out the floater was filled with water, I replaced it with a new one and de-scaled the boiler.
Now when connect it to power it fills the boiler and stops as it should.
As I'm testing, when using the hot water dispenser for about a minute or two the boiler safety overflow valve (located on top of the tank) starts dumping water.
Any idea what is causing the overfilling?Tags: None
- Flag

Leave a comment: