My Rancilio s26 which I have at my work was switched off for the Christmas Break. When I turned it on today it immediately tripped the RCD at the power board. Tried a different power point / circuit - same result. The light on the machine comes on momentarily when the machine is powered up, but then the RCD is activated.
On visual inspection the relay on the Gicar Electronic Autofill Box RL30/1E-2CF looks like one of the contacts (looks like there is a pair of contacts in the relay) has burnt out.
The relay is MZP A 002 48 05. Looks like it is from this series
https://www.gavazzionline.com/pdf/Mz2p10ae.pdf
Has anyone ever tried to replace the relay on the PCB to get one of these Gicar boxes going again?
Any idea where I can source one - preferably online so I can get it ordered after hours.
Thanks, Tim
On visual inspection the relay on the Gicar Electronic Autofill Box RL30/1E-2CF looks like one of the contacts (looks like there is a pair of contacts in the relay) has burnt out.
The relay is MZP A 002 48 05. Looks like it is from this series
https://www.gavazzionline.com/pdf/Mz2p10ae.pdf
Has anyone ever tried to replace the relay on the PCB to get one of these Gicar boxes going again?
Any idea where I can source one - preferably online so I can get it ordered after hours.
Thanks, Tim


Comment