If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Who carries a Silicon Group head seal for the San Marco Lever group?
Might be out of luck...as far as I know Cafelat does not produce silicone gaskets outside of the 58 mm groups (not economically feasible due to the small user base)...
Dave... you sure they even make silicon ones ? I can find plenty of rubber ones but no mention of a silicon one for the Leva machine. A mob in the UK sells service kits for the San Marco (suitable for the Leva) but these are all rubber gaskets.
They might only be rubber as this will allow for more force applied when sealing (possibly a good idea with the pressure from the Leva).
Cafelat does offer silicon seals for non-E61 groups. Eg https://www.coffeeparts.com.au/80008-s
however Dave has already checked with CP.
Ps this is an Izzo thread so we are off topic.
Thanks all,
Chris has some at Talk Coffee
Cheers
Dave
Morning Dr Dave! Chris at Talk Coffee has all sorts of innovative coffee related things in his store, he also has a vast knowledge base that we no longer have the benefit of, and, it shows.
Comment