After a week of being off while I was away when I turned my Alex Leva back on yesterday the PID display is stuck on 1.04, which appears to be the display for boiler function off while water refill is on.
The boiler is not heating.
The tank refill can be triggered. Commences and ends - solenoid clicks on and off.
Have done this several times.
PID display remains at 1.04.
The LED blinks to indicate that resistance is operating.
Heating functions cannot be triggered and cannot be programmed (as if the heating element has been turned off and cannot be turned back on).
I can only get into the F.03 (programming of parameters) and PrS (return parameters to default settings).
Anyone come across this?
PID unit itself appears to be in good condition, visually at least.
Machine is three years old.
I leave it on except when I go away.
The boiler is not heating.
The tank refill can be triggered. Commences and ends - solenoid clicks on and off.
Have done this several times.
PID display remains at 1.04.
The LED blinks to indicate that resistance is operating.
Heating functions cannot be triggered and cannot be programmed (as if the heating element has been turned off and cannot be turned back on).
I can only get into the F.03 (programming of parameters) and PrS (return parameters to default settings).
Anyone come across this?
PID unit itself appears to be in good condition, visually at least.
Machine is three years old.
I leave it on except when I go away.



Comment