Ive adjusted my pressure switch so it cuts out at 0.9bar. It cuts in at 0.6bar. After turning the machine on I wait about 1/2hr for it to warm up. By this time the pressure switch has cycled at leat 2 times. I then open the steam valve and the pressure quickly drops to near 0bar. Only after a few more cycles does it produce good dry steam at between 0.6 and 0.8 bar.
Whats going on here? It doesnt seem right. I have re-seated the taps and the OPV recently, maybe Ive missed something? I adjust the OVP to about 1.6bar, this should be OK yeah?
Whats going on here? It doesnt seem right. I have re-seated the taps and the OPV recently, maybe Ive missed something? I adjust the OVP to about 1.6bar, this should be OK yeah?




Comment