Announcement

Collapse
No announcement yet.

Profitec 700 dual boiler setting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Profitec 700 dual boiler setting

    Hi all.
    I was wondering if any Profitec 700 owners here have changed their boiler setting to F02 = 5?
    Basically this setting heats both boilers (steam and brew) on simultaneously rather than the default F02 = 7 which is alternating heat (brew boiler has priority).

    Interested to hear your comments.

    cheers.



  • #2
    Don't you need to run on a 15A or 20A circuit when using simultaneous boiler heating modes?
    I'm not sure I see the advantage anyway. I find the boilers on my Pro 600 recover quickly anyway.

    Comment


    • #3
      Originally posted by moy71 View Post
      Hi all.
      I was wondering if any Profitec 700 owners here have changed their boiler setting to F02 = 5?
      Basically this setting heats both boilers (steam and brew) on simultaneously rather than the default F02 = 7 which is alternating heat (brew boiler has priority).

      Interested to hear your comments.

      cheers.

      I might be wrong, but if a machine has a 15A capability which can be set by the end user, does it not by law need to be supplied with a 15A lead and connected to 15A mains?

      Comment


      • Dimal
        Dimal commented
        Editing a comment
        Absolutely correct...
        The thread below that 338 has linked to says it all really.

    • #4
      This thread might be helpful

      https://coffeesnobs.com.au/forum/equ...aneous-heating

      Comment

      Working...
      X