I have a new Profitec Pro 700. I hooked up the water line and drain. The drain does not empty, there is not enough water pressure to push the water out of the black plastic tray. The tube lays flat on the counter and has a slight incline as it curves to go into the hole in the counter top. Has anyone else had this problem. Do I have to raise the machine?
Announcement
Collapse
No announcement yet.
Profitec Pro 700 will not drain
Collapse
X
-
-
Most likely causes;
- not enough fall on drain hose
- an upward section of hose, needs to be falling all the way
- end of hose is submerged in water, creating a vacuum, which will slow draining
The hole in your bench for the drain needs to be close to the drain tub, a lot of people put it too far away so the hose only has a slight fall and won't drain properly
- Flag

Comment