Announcement

Collapse
No announcement yet.

Atomic Restore Job

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • christos10
    replied
    Re: Atomic Restore Job

    Sorry Phatboy, had to use a sniper for this one... it finnished at 6am, and there was no way i am getting out of bed to bid on a coffee machine.

    Turned out a nice machine though... and makes a decent coffee too.

    Leave a comment:


  • PhatBoy
    replied
    Re: Atomic Restore Job

    guttered you outbid me on this!!!
    I wondered if a coffeesnob nut would have got it

    Leave a comment:


  • sorrentina
    replied
    Re: Atomic Restore Job

    WOW- you sure thats the same machine?

    Amazing how well it came up. I wonder how it ended up in such a state in the first place? It looked like it may have been buried for a period...

    Hows the brew?

    Looks to me like you could slightly adjust the frother arm to point straight down- once in position you want to tighten the assembly until the steam tube does not turn.

    Andy- thanks for the post Autosol polishing tips- I will give that a go. Toothpaste, huh? A nice minty finish to the polish...

    You can also seal the polished surface with a light application of Carnuaba or bees wax.

    Leave a comment:


  • melicious
    replied
    Re: Atomic Restore Job

    oooh it looks so luuurvly! That really was fast too - thats some killer elbow greasin!
    editted cause Im not quite awake yet :

    Leave a comment:


  • Andy
    replied
    Re: Atomic Restore Job


    Nice work ChrisD... it sure was an ugly child a week ago.


    A little late to chime-in but I do agree on the banter above...

    Citric / decaler / fine scotchbrite / super fine wet and dry sandpaper (use it wet) and then Autosol / then toothpaste / and if you want a mirror, finish with Brite Shine.

    Autosol rocks on alloy. After you have got it as good as you can with Autosol grab a can of "Brite Shine" cotton wadding and really finish it off. A single can will last a life time as you only need a small wad and "rub like billyo" until you can see your face in it.

    A picture of the can:
    http://www.autobarn.com.au/AB_images/products/images/prod_1199924900.jpg

    The best thing is that if you finish off with Brite Shine it keeps its look for longer... and needs less work when you want to give it a quick clean in future.

    Leave a comment:


  • Koffee_Kosmo
    replied
    Re: Atomic Restore Job

    What do you get when a little hard work combined with a little sympathetic elbow grease is applied

    A really good restoration job

    Congrats on a job well done [smiley=tekst-toppie.gif]

    KK [smiley=thumbup.gif]

    Leave a comment:


  • christos10
    replied
    Re: Atomic Restore Job

    So a weekend of working on the polish and some fine tuning to get the new black knob to fit, I have completed this restoration in about a week.

    Thanks to the guys at La Sorrentina for all the spare parts & polish and advise and to the CSers opinion above.

    Still a few character dints and scratchs left but i think it adds to the story of peice. Its more than just a coffee maker, it has history and charm.

    Take a look and let me know what you think.



    Leave a comment:


  • christos10
    replied
    Re: Atomic Restore Job

    Thanks John, The label was cleaned with a soft sponge and water only... really really slowly

    Have not used the steel wool since the first clean. But it was a very fine steel wool not the stuff you scrub the pots and pans with. Have been using fine sand papper ever since, and am awaiting the parts to polish and to put it all together.

    Hopefully up and running by the end of the weekend.

    Leave a comment:


  • sorrentina
    replied
    Re: Atomic Restore Job

    your parts should arrive today Chris.

    A word of caution- lay off the steel wool- try and use the finest grade sandpaper you have from here on in - and then finish with the Autosol (I put some in the package) and soft cloth rags. You may need to work a little extra to get out the micro scratches put in by the steel wool...

    I must say- congratulations on cleaning the label- you managed to bring it back to white and black without destroying it.

    Be sure to message me in a few weeks- I have a new order of stainless baskets coming in around then and will send you one free. Stocks are too low at the moment...

    Leave a comment:


  • christos10
    replied
    Re: Atomic Restore Job

    I think John has a point here, all my new parts will be super shiny so I think the Body should match.

    Now that i am in the chassis stage i will be sanding like crazy... getting ready for the parts to arrive and the going crazy on the polish before the final re assembly.

    There are a few too many Character marks on this one, I think the previouse owner got a bit too agressive when they removed the Black water knob.

    So off to the workbench for me.

    Leave a comment:


  • sorrentina
    replied
    Re: Atomic Restore Job

    hmmm, to shine or not to shine- that is the question.

    In this case I vote for polish like mad. With Autosol.

    Because the new parts (which you just ordered, thankyou) are super shiny and the body wont match otherwise.

    Also I am (perhaps selfishly) interested to see how far you can get that Atomic- because it is pretty much as basic as things can get as far as a restoration project goes- the bare minimum- bare bones- like building a Model T ford starting with only the chassis (only a lot easier).

    But that chassis is a solid piece of alloy, sand cast (pretty much by hand) in a single piece- in Milan- and I think it could be a real surprise just how far it can be recalled to life.

    Cant wait to see the end result.

    Just be careful of the label on the top. These can be damaged easily on some of the older machines- and getting a new one from Bon is impossible unless you go there in person.

    Leave a comment:


  • melicious
    replied
    Re: Atomic Restore Job

    Originally posted by 446069696A6A5044607C62600F0 link=1242741640/3#3 date=1242775545
    Originally posted by 6E666F6A606A6C7670030 link=1242741640/2#2 date=1242743734
    Im voting for leave it rustic, but I collect atari,  
    I have an Atari 520 ST as new in box with books and advertising brochures ect

    KK
    sweet - I got the full spectrum of 2600s (from Big Woody to darth and rainbow/junior)... the ST is whole lot more to collect, dont think Id even start. But that snoopy is making me heaps jealous lol... i reckon I could just have 1 of those.

    Leave a comment:


  • christos10
    replied
    Re: Atomic Restore Job

    I love retro things, and before my Atari, I had my Snoopy game.

    But i also love really shiny things.

    Not too sure about citric on aluminium, but i just let the machine sit in Cafetto Vanish Descaler overnight. This worked a fair bit of the scale off.

    Pulled it out this morning, need to wait for the spare parts to arrive before i can boil this through the machine but am happy with the progress.

    oh and a picture of the snoopy game if anyone cares...

    Leave a comment:


  • au_d2
    replied
    Re: Atomic Restore Job

    I vote for the POLISH.

    My step-father in law .. is a traditional Antique restorer.  Does everything by hand .. no dipping.   Anyway ... the real beauty of an antique piece is its "imperfections"  the dents and dings that it collects in its lifetime.  An Anitique restorers job is to bring that piece of furniture back to life (meaning to restore its newness .. its shine) BUT leaving the pieces Character intact.  

    The Sorrentina thread has nice pics and detailed explanations on what to use to bring life back to your Atomic. (Have a look a Jacks model B for inspiration .. reply #26 .. shiny .. but with HEAPS of Character)

    http://coffeesnobs.com.au/YaBB.pl?num=1236240384

    Leave a comment:


  • beanflying
    replied
    Re: Atomic Restore Job

    No Citric is very mild and does a good job and compared to other available in the home like vineger doesnt taste much. Long discussion in the above thread on cleaning of Aluminium.

    Leave a comment:

Working...
X