Originally posted by 130802095151610 link=1258508330/13#13 date=1259722900
However... If nothing is coming through... The process may not work...
If ya can... Get some large Si tubing and a 50ml syringe...
1: Set ya system up for a STEAM de scale as per my previous post...
2: Connect the Si tubing to steam tip and to the syringe...
3: Open the steam valve... Ie Switch it on and use the syringe to draw /suck in an attempt to get some fluid coming through...
NOTE... Set ya system up and work outside as per my instructions/post.. In addition use eye/face protection and gloves.. If it pops off and you get splashed in teh face eyes... The de scaling solution may not be very good... It will also be HOT... Almost ... I say almost steam..
4: Do not run the steam pump for excessive time... Then try again after it has been sitting for 5 min...
5: If it clears then flush - do at least another 2 de scale process with clean water and make sure your system and steam pathways are clean of any chemicals..


Leave a comment: