Hello all, long time lurker, first time poster.
Since i had my machine and got better and better frothing milk, i found the standard tip with the froth enhancing hole a hinderance. Wanted to do a silvia wand/tip swap but its quite involved so thought i would try modding the standard tip.
I cut the tip off at the side hole. i then put the remaining small part (top) of the tip into a drill and used a file to smooth the cut end.
Now its possible to create nice microfoam, but i find it easier to botch the steaming. the shorter length isnt really an issue.
Here are some pics.



Since i had my machine and got better and better frothing milk, i found the standard tip with the froth enhancing hole a hinderance. Wanted to do a silvia wand/tip swap but its quite involved so thought i would try modding the standard tip.
I cut the tip off at the side hole. i then put the remaining small part (top) of the tip into a drill and used a file to smooth the cut end.
Now its possible to create nice microfoam, but i find it easier to botch the steaming. the shorter length isnt really an issue.
Here are some pics.





Comment