If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Gday Artman, welcome to Coffee Snobs, nice art and camera work
PS, just noticed your join date, Jun 24th, 2006, 11:03pm, hope it wont be another 4 years before we hear from you again.
Since i had my machine and got better and better frothing milk, i found the standard tip with the froth enhancing hole a hinderance. Wanted to do a silvia wand/tip swap but its quite involved so thought i would try modding the standard tip.
I cut the tip off at the side hole. i then put the remaining small part (top) of the tip into a drill and used a file to smooth the cut end.
Now its possible to create nice microfoam, but i find it easier to botch the steaming. the shorter length isnt really an issue.
Leave a comment: