Announcement

Collapse
No announcement yet.

$600 budget for the works. What to buy 2nd hand?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: $600 budget for the works. What to buy 2nd hand?

    Originally posted by 38040D1500610 link=1282867425/15#15 date=1282954838
    Originally posted by 557A73716659757A75737179717A60140 link=1282867425/14#14 date=1282952489
    SO many people do this... And then state they have to add sugar..
    Oh dear, here we go again, bash the poor old sugar user I use sugar, I always have used sugar, I like sugar in my coffee, (snip)

    Add me to this list as well.. (and to the list of 6910 users lamenting the short life they seem to have)....

    Whilst the 6910 does indeed make a nice coffee, having the tanks rot through after 2.5 years is nuts.. The price of repair is half the price of a new one, and even then they wont guarantee how long it will last.. A nice coffee though. I do miss mine.

    Comment


    • #17
      Re: $600 budget for the works. What to buy 2nd hand?

      Originally posted by 605C554D58390 link=1282867425/15#15 date=1282954838
      Dont take this post too seriously, just felt a compulsion to stick up for the socially outcast sugar addicted minority.  
      Now ya made me CRY..

      I like my sugar as well at times and  always have it in my Iced coffee ( raw sugar is my preference)

      Just think there is a diferance between liking sweet things (my wife) VS having to sugar coat to hide a crap outcome  

      Originally posted by 7D585758575D5C4B0808390 link=1282867425/16#16 date=1282957558
      (and to the list of 6910 users lamenting the short life they seem to have)....
      Arrrrr yes; but we are Australians and are only too quick to post our dis pleasure VS all those that never post because thay have had great service.

      CS and others places are often a focus point for problems.. The up side is that many become educmatied and learn and move forward  8-)  

      Like a complaints / service centre... How many ever ring / contact to say "Get gear guys - Keep up the good work" - Na they only get complaints....  

      Thus one of the most stressful positions. The service desk  :-X Just look at IT..  I would suggest the large majority of feedback only happens when it fails...  For that matter not unlike our Hospitals and medical service...  As much as they get creamed in the papers and in Politics;  Australia is one of the few places in the world you actually get real care.

      End of emotional hijack  

      I love my DCM - It has never failed me and neither has any of the 10 plus  EM6910s where I have    instructed people in their use and maintenance  (3 owned - with one now having 3 years in a work place)

      But I do not have enough fingers to count those that have failed and needed assistance from CS or me directly..

      A few with electrical problems;while  the majority are a direct outcome of lack of understanding, misinformation and less than ideal maintenance.  Should people take this personal - NO !

      It is a common issue for many products today where assumptions are made by both the seller and the buyer.

      Thus a good relationship with your Supplier / Sponsor / Service agent;  should see you happy - regardless of your choice of equipment.

      8-) 8-)

      Comment


      • #18
        Re: $600 budget for the works. What to buy 2nd hand?



        Originally posted by 7D585758575D5C4B0808390 link=1282867425/16#16 date=1282957558
        (and to the list of 6910 users lamenting the short life they seem to have)....
        Arrrrr yes; but we are Australians and are only too quick to post our dis pleasure VS all those that never post because thay have had great service.

        CS and others places are often a focus point for problems.. The up side is that many become educmatied and learn and move forward  8-) [/QUOTE]


        Ah, dont get me wrong.. I loved the 6910.. Still do and may buy another.. Just think it should have lasted longer. Of the three people I called here in Perth to have it serviced, 2 refused saying they were tired of customer complaints about short lifespan because of the tanks/elements leaking and shorting the logic board, and no one wants to accept any responsibility for the lifespan after a repair. All three said it was likely to fail again soon after the repair.

        It may all be fluff, but I dont repair them so I wouldnt know... I was pretty pedantic about the care of it, so much so my wife would just roll her eyes ;-)

        Still, maybe its time to move up. Neither of us cae for the press any more and instant just leaves us choking.. Spoiled for sure.

        Comment


        • #19
          Re: $600 budget for the works. What to buy 2nd hand?

          Originally posted by 6E4B444B444E4F581B1B2A0 link=1282871274/17#17 date=1282966615

          Originally posted by 7D585758575D5C4B0808390 link=1282867425/16#16 date=1282957558
          (and to the list of 6910 users lamenting the short life they seem to have)....

          Arrrrr yes; but we are Australians and are only too quick to post our dis pleasure VS all those that never post because thay have had great service.

          CS and others places are often a focus point for problems.. The up side is that many become educmatied and learn and move forward  8-)

          Ah,  dont get me wrong..  I loved the 6910.. Still do and may buy another..  Just think it should have lasted longer.  Of the three people I called here in Perth to have it serviced, 2 refused saying they were tired of customer complaints about short lifespan because of the tanks/elements leaking and shorting the logic board, and no one wants to accept any responsibility for the lifespan after a repair.  All three said it was likely to fail again soon after the repair.

          It may all be fluff, but I dont repair them so I wouldnt know...  I was pretty pedantic about the care of it, so much so my wife would just roll her eyes ;-)

          Still, maybe its time to move up.  Neither of us cae for the press any more and instant just leaves us choking..  Spoiled for sure.
          So go and do it - Splurge Pamper ya self

          PS. My wife still thinks the coffee stuff gets Tooooo Much attention

          Comment


          • #20
            Re: $600 budget for the works. What to buy 2nd hand?

            Originally posted by 61444B444B4140571414250 link=1282871274/15#15 date=1282957558
            Whilst the 6910 does indeed make a nice coffee, having the tanks rot through after 2.5 years is nuts..
            Now for any CSér who has seen the insides of the EM6910 series... That comment had me stumped until ya PM/E-mail.. Though ya was talking about the water tank : :

            Clarification CSérs

            danander11 was advised that the Steam Thermoblock had rotted through

            And it appears to be just the OT thermal cut-out.. Now the OT unit can fail for a number of reasons, but the main cause is the STEAM is on for too long and a restriction in water flow...

            Can not say for certain without hands on but from what I have experienced and from what danander11 has stated ...

            The bit that gets me; is once again a service person advises teh user of a particular state of teh unit and then also attempts to sell another brand.. The issue is not the sell, but that the repair/service was either not done OR the person is not experienced.... The assumption is that teh user will suck it up after a couple of years and just buy another machine.

            Untill proven other wise... Dodgy servic place with a Capital D :P

            PS. Yea I know Perth has crap water, but it would choke and block the steam block not eat holes in it and thus drip water over the cct board.

            PPS. If ya know the EM series... The machine must have been used upside down to have that happen. The steam block and CCT board are no where near each other.

            Sorry danander11 I had to vent. I get it wrong on occasions; but could never blatantly rip someone off on purpose...

            Comment


            • #21
              Re: $600 budget for the works. What to buy 2nd hand?

              [QUOTE=624D4446516E424D4244464E464D57230 link=1282871274/19#19 date=1283349041]
              Originally posted by 61444B444B4140571414250 link=1282871274/15#15 date=1282957558
              Sorry danander11 I had to vent.  I get it wrong on occasions; but could never blatantly rip someone off on purpose...

              All good on my end, and I appreciate the help.. Ill vent tomorrow to Sunbeam about their "service" centre and let them know how I feel about it..

              Perth water is, indeed, terrible... but its what we have. Ill try and sort it out myself and if not send it away.. I miss that morning coffee.

              Comment


              • #22
                Re: $600 budget for the works. What to buy 2nd hand?

                Originally posted by 60454A454A4041561515240 link=1282871274/20#20 date=1283351030
                Perth water is, indeed, terrible
                I thought Adelaide had the reputation of having the worst water in Aust. :-?

                Comment


                • #23
                  Re: $600 budget for the works. What to buy 2nd hand?

                  Originally posted by 5A666F7762030 link=1282871274/21#21 date=1283387876
                  I thought Adelaide had the reputation of having the worst water in Aust.
                  Thats because its downstream from Canberra.

                  Comment


                  • #24
                    Re: $600 budget for the works. What to buy 2nd hand?

                    Update:

                    It ended up being a $3 thermal fuse on the steam wand block. I spliced it in and put everything back together and the unit works like a champ.. It got a thorough scrubbing and flush and tomorrow will get a new collar and seal.. (the old one is worn).

                    Ill ring sunbeam and give them an earful on their service centres practices..

                    Im not a appliance repair person and I had it sorted in 30 minutes. Im pretty cheesed that it took a week and a $300+ quote from their guys.. I still say they never even opened it up.

                    Be wary folks and question everything.

                    Comment


                    • #25
                      Re: $600 budget for the works. What to buy 2nd hand?

                      Originally posted by 193C333C3339382F6C6C5D0 link=1282871274/23#23 date=1283412910
                      Update:

                      It ended up being a $3 thermal fuse on the steam wand block.  I spliced it in and put everything back together and the unit works like a champ..  It got a thorough scrubbing and flush and tomorrow will get a new collar and seal.. (the old one is worn).

                      Ill ring sunbeam and give them an earful on their service centres practices..

                      Im not a appliance repair person and I had it sorted in 30 minutes.  Im pretty cheesed that it took a week and a $300+ quote from their guys..  I still say they never even opened it up.

                      Be wary folks and question everything.
                      Quality service support is often under rated and given low  consideration for many things..

                      Health for example will often have it in the tender documents but when it comes to the crunch... Service is rated so poor that it only takes a slightly lower offer in $$$ to knock out a truly competitive product with great UP TIME.

                      I have often seen Service support given a 5% value when scoring a tender and trust me real service support should be significantly higher.. However most fail to see until it is too late - but then the budget had to be met (cynic I is).


                      Conclusion... Question Sunbeam and Question the allotted service agent.. But do it with consideration as the good guys do not deserve crap... They need to be pampered and thanked

                      I have made comment before about Dodgy brothers and service agents pulling a quick slight of hand re warranty and charging and double dipping.... Most dont but ASSUMPTIONS will get ya every time.

                      Now where was that under rated thermal fuse uuummmmm  

                      Comment

                      Working...
                      X