Announcement

Collapse
No announcement yet.

Cleaning a Sunbeam EM6910

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Cleaning a Sunbeam EM6910

    Thanks, arcenite. Yes, I unscrewed and removed the screen

    specialpants, I think thats the problem. The machine was on.
    apparently I didnt read the manual properly :
    Ill try again later today. Thanks.

    Comment


    • Re: Cleaning a Sunbeam EM6910

      Thanks, arcenite. Yes, I unscrewed and removed the screen

      specialpants, I think thats the problem. The machine was on.
      apparently I didnt read the manual properly :
      Ill try again later today. Thanks.

      Comment


      • Re: Cleaning a Sunbeam EM6910

        Thanks, arcenite. Yes, I unscrewed and removed the screen

        specialpants, I think thats the problem. The machine was on.
        apparently I didnt read the manual properly :
        Ill try again later today. Thanks.

        Comment


        • Instead of the what I consider to be absurdly expensive cleaning tablets try denture cleaning tablets when backflushing via the group head. I purchased a homebrand packet of 48 at Woolworths/Safeway for around $5. If they are safe enough to use on Orthodontic appliances etc. that live in our mouths a good portion of the time, I feel comfortable using them safely to clean my machine. They, in my opinion, do a great job.

          Comment


          • Originally posted by Margoaugogo View Post
            Instead of the what I consider to be absurdly expensive cleaning tablets try denture cleaning tablets when backflushing via the group head. I purchased a homebrand packet of 48 at Woolworths/Safeway for around $5. If they are safe enough to use on Orthodontic appliances etc. that live in our mouths a good portion of the time, I feel comfortable using them safely to clean my machine. They, in my opinion, do a great job.
            Just to throw it out there, that's not necessarily the issue; dentures aren't coffee-machines and certain compounds that might not attack ceramics/plastics (or whatever dentures are made from) can still attack brass/aluminium might.

            I'm not saying the tablets aren't fine, but that they're safe for dentures means nothing.

            Comment


            • Sorry to once again dig up an old thread, but I thought this is worth asking here, and not starting a new thread, as there is some really good info in here regarding cleaning already.

              Has anyone tried the Cino Cleano products that Coffeeparts sell, in the 'cleaning products (home) section.

              http://www.coffeeparts.com.au/accessories/cleaner-home

              "Espresso Machine Backflush Cleaner
              Item code: JB-985-green
              by Cino Cleano

              Designed to clean traditional espresso machines with 3-way solenoid valves. It will ensure your Espresso Machine is always clean & running to its optimum efficiency, producing fabulous coffee, day in, day out"

              "Espresso Machine Cleaning Solution
              Item code: JB-985-red
              by Cino Cleano
              Designed to clean thermo block espresso machines (refer to your machine instruction manual if you are unsure of your machine type).

              Cino Cleano Espresso Machine Cleaning Solution will clean old coffee oils, milk deposits and remove scale from your espresso machine. Regular use will keep your machine performing at it's best and producing great coffee everytime."


              It sounds as if these products have been specifically made, or maybe marketed, for the 6900/6910 and the like. I'd love to know if anyone has had any experience with them.

              Comment


              • So I guess no one has used these before?

                I really would love some extra advice, as I'm really due to do a chemical backflush. I've had the machine since Christmas, and have been doing the automated program with just water every second day. I've cleaned the screens several times since then, and it really doesn't take long for oil residue to build up. I'm super fussy about cleaning the group head after every pull. I even use an old 20mm flat artists brush with most of the handle cut off. Works a treat!

                A question about the cino cleano descaling solution... Does this product apply to the 6910? As it has a stainless lined thermo block. This product isn't just made for normal aluminium blocks is it?

                Also does anyone know the difference between the cino cleano backflush cleaner I posted, and the standard Cafetto espresso backflush powder?

                Any help would be greatly appreciated! :-)

                Comment


                • Originally posted by Wushoes View Post
                  There is a small hole in the Sunbeam provided rubber blind filter disk. When you use it and the pressure gauge moves dead centre, the Sunbeam is spot on.
                  Didn't know that, old posts can have good info in them.
                  Maybe an issue with mine as it will go up into the black.
                  Mine is an old machine, I have used cafe cleaner on it a couple of times.
                  Maybe I should do it more often.

                  It was never cleaned in the 4 years before I got it, and did around 5000 coffees in that time.

                  Comment


                  • Originally posted by MrSoulSong View Post
                    So I guess no one has used these before?

                    I really would love some extra advice, as I'm really due to do a chemical backflush. I've had the machine since Christmas, and have been doing the automated program with just water every second day. I've cleaned the screens several times since then, and it really doesn't take long for oil residue to build up. I'm super fussy about cleaning the group head after every pull. I even use an old 20mm flat artists brush with most of the handle cut off. Works a treat!

                    A question about the cino cleano descaling solution... Does this product apply to the 6910? As it has a stainless lined thermo block. This product isn't just made for normal aluminium blocks is it?

                    Also does anyone know the difference between the cino cleano backflush cleaner I posted, and the standard Cafetto espresso backflush powder?

                    Any help would be greatly appreciated! :-)
                    I can't comment on usage in a 6910, but I have used both the descaler and the backflush products from Cino Cleano in my Bezzera (single boiler HX machine). They work very well.

                    Comment


                    • Originally posted by MrJack View Post
                      I can't comment on usage in a 6910, but I have used both the descaler and the backflush products from Cino Cleano in my Bezzera (single boiler HX machine). They work very well.
                      Thanks for the reply! Glad to hear they work well.

                      The main thing I'm wondering about now is the ingredients between the Cafetto and the Cino Cleano. The Cafetto is a lot more cost effective too. You can get two Cino's (100gms each) for the same price as 500gms of Cafetto.

                      Comment

                      Working...
                      X