Announcement

Collapse
No announcement yet.

EM6910 3 way valve assembly?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A_M
    replied
    Re: EM6910 3 way valve assembly?

    Originally posted by ausdb link=1220233619/0#7 date=1221555076
    That was me  :-[
    Sorry I didnt get to take some more with the lid off, wedding related tasks got in the way
    Thanks AUSdb you did a great job and I am sure others will gain from your efforts... Sorry I posted you work, but I got down to less than 1Meg and I know others would appriciate your efforts.

    Thanks again.

    Leave a comment:


  • ausdb
    replied
    Re: EM6910 3 way valve assembly?

    That was me :-[
    Sorry I didnt get to take some more with the lid off, wedding related tasks got in the way

    Leave a comment:


  • A_M
    replied
    Re: EM6910 3 way valve assembly?

    Another CS member sent me this (ausdb) and as it may assist others pulling the Sunbeam EM6910 apart, it is worth having handy.

    Leave a comment:


  • doff23
    replied
    Re: EM6910 3 way valve assembly?

    Thanx for the manual, very helpfull

    Leave a comment:


  • Stan
    replied
    Re: EM6910 3 way valve assembly?

    Thanks,

    That may come in handy [smiley=thumbsup.gif]

    Leave a comment:


  • repeet
    replied
    Re: EM6910 3 way valve assembly?

    Here is the PDF.

    Leave a comment:


  • A_M
    replied
    Re: EM6910 3 way valve assembly?

    Originally posted by repeet link=1220233619/0#1 date=1220428843
    Phoned Sunbeam and got an assembly diagram sent to me.  It isnt the 3 way valve but rather an anti drip screw. Anyway it  is spring first then blue plunger bit on top.
    Care to scan or pass on..

    I have a unit that works well for Steam and Coffee, but when I use the Hot water option... 25% of the water comes out the main head... rather than the Hot Water arm...

    I can only assume that the same valve might be involved and either faulty, dirty or stuck.

    Have done a head clean and any number of other tricks, but no change.

    If any one has a some clean step by step instructions as to getting the EM 6910 apart, that would also be great. To Quote Coffee Connoisseurs comment, " Access to the interior involves removing about a dozen screws of various shapes and sizes; its a technicians nightmare" .

    Thanks.

    Leave a comment:


  • repeet
    replied
    Re: EM6910 3 way valve assembly?

    Phoned Sunbeam and got an assembly diagram sent to me. It isnt the 3 way valve but rather an anti drip screw. Anyway it is spring first then blue plunger bit on top.

    Leave a comment:


  • repeet
    started a topic EM6910 3 way valve assembly?

    EM6910 3 way valve assembly?

    I pulled out the 3 way valve and forgot to note which way the spring sits in the cup. Does the spring sit in the cup/nut first or does the rubber seal?
    I pulled it out to check it as the machine seems to surge during a pour where the dial goes from about 2 oclock back to 12 oclock and then keeps bouncing between the 2 with the noise varying as well.
    I took it in to get checked by the service agent but they didnt find anything wrong with it using there test basket in the porta filter.
Working...
X