Announcement

Collapse
No announcement yet.

EM6910 Power Light Flashing Red

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: EM6910 Power Light Flashing Red

    Originally posted by 3F26224C0 link=1251251711/29#29 date=1251799854
    Just in case I decide to give the Sunbeam the flick I have been looking at the alternatives. Came across this Isomac Zaffiro & Isomac Granmacinino Combo from site sponsors Di Bartoli.

    http://www.dibartoli.com.au/product_details.asp?pid=175

    Interested in your thoughts about the Isomac Zaffiro

    sjn
    The Zaffiro falls into the dual purpose single boiler e-61 class with the VBM Domobar Piccolo (a couple for sale in the Hardware FS section) and the Diadema Perfetta.

    You will have to wait after pulling a shot to texture milk and master the art of boiler priming. The VBM and Perfetta can be tweaked for temperature with the use of a Scace device and therefore can produce great espresso. I have never seen inside a Zaffiro so am unsure if its adjustable as well...

    Hope that helps...

    2mcm

    Comment


    • #32
      Re: EM6910 Power Light Flashing Red

      Originally posted by 653A22343F3438313132323A3639570 link=1251251711/30#30 date=1251800749
      The Zaffiro falls into the dual purpose single boiler e-61 class with the VBM Domobar Piccolo (a couple for sale in the Hardware FS section) and the Diadema Perfetta.

      You will have to wait after pulling a shot to texture milk and master the art of boiler priming. The VBM and Perfetta can be tweaked for temperature with the use of a Scace device and therefore can produce great espresso. I have never seen inside a Zaffiro so am unsure if its adjustable as well...

      Hope that helps...

      2mcm
      Thanks for the info, I have been doing some reading and I dont think that this machine is for me.

      sjn

      Comment


      • #33
        Re: EM6910 Power Light Flashing Red

        Hi guys, good to see so many love coffee like I do!

        Was just reading up on the flashing red light thing, I have fixed a few of these and its new to me too. The one I an doing now is a EM6900, when I tern it on it heats up fine and I can steam fine now which was the fault I was fixing but now cant make coffee  or hot water, (these two are conected internaly) It heats the group head but the pump will not go, I may have left somthing unpluged inside.

        Leaving it turned on probable wont start a fire because the two heating elements have thermal fuses on them that blow if it gets to hot and the pumps the same. (however these are quite a strugle to replace)

        Changing the LEDs wont be to hard all you need is a screw driver and a 13mm deap sochet and a little bit of know how when it comes to pulling things apart.

        Sorry for the long post I just had to get it all off mt chest.

        Comment


        • #34
          Re: EM6910 Power Light Flashing Red

          My recently deceased EM6910 had the exactly same problem as yours sjn (flashing red light). As with yours it never really seemed to effect performance.

          Comment


          • #35
            Re: EM6910 Power Light Flashing Red

            Originally posted by 2223293A24213B480 link=1251251711/33#33 date=1252990851
            My recently deceased EM6910 had the exactly same problem as yours sjn (flashing red light).As with yours it never really seemed to effect performance.  
            How long did it last before it died on you, or did some other fault develop? I am researching all my options for a replacement, so much to take in and I am now getting infomation overlaod. Too many to pick from.

            Comment


            • #36
              Re: EM6910 Power Light Flashing Red

              Hi sjn. AFAIK the flashing red light probably didnt have anything to do with the later problems I had. I did some research into the flashing red light and couldnt find any information (I didnt try contacting Sunbeam). The machine worked perfectly fine otherwise and it wouldnt always flash, so I just learnt to live with it.

              One day, I emptied the reservoir for cleaning. After replacing it and re-filling, the machine did not pump any water through the group. I presumed it was a blockage or air bubble somewhere along the line. When I couldnt flush it out I decided to take it apart (was past its warranty, just). I managed to do more damage to it whilst I was trying to fix it.

              Its been sitting at the SB service centre for nearly 4 weeks now waiting for a repair quote. I suspect it will cost more than its worth.

              I know what you mean about being confused by choices! My advice would be to go as high end as you can, otherwise you will just keep upgrading and spending more money (like me).


              Comment


              • #37
                Re: EM6910 Power Light Flashing Red

                Originally posted by 6362687B65607A090 link=1251251711/35#35 date=1253000800
                The machine worked perfectly fine otherwise and it wouldnt always flash, so I just learnt to live with it.
                Same for me atm.

                Originally posted by 6362687B65607A090 link=1251251711/35#35 date=1253000800
                Its been sitting at the SB service centre for nearly 4 weeks now waiting for a repair quote. I suspect it will cost more than its worth.
                I would be interested to know the outcome.

                Originally posted by 6362687B65607A090 link=1251251711/35#35 date=1253000800
                I know what you mean about being confused by choices!My advice would be to go as high end as you can, otherwise you will just keep upgrading and spending more money (like me).
                If I can get a good grinder and machine for under $3k I would be happy.

                Regards sjn

                Comment


                • #38
                  Sorry to dig up an old thread. My em6910 did the same this morning with the red power light flashing constantly. It's a stinking hot day up here in QLD today. The air temp was 35 degrees inside the house by my coffee machine and after being on for about an hour the front panel was too hot to touch for more than a few seconds. The hot water wand was running intermittently but water ran through the group head ok.

                  After leaving it off for an hour or so cool down everything seems to have returned to normal.

                  I'm wondering if it's an overheat warning?

                  To the op did your machine end up dying or did you replace it before that?

                  Comment


                  • Chappylovescoffee
                    Chappylovescoffee commented
                    Editing a comment
                    Hi all It's 2022 and i have just picked up a twice used Em6910. I have been using a Brevvile to make coffee for parents at school. Due to demand the milk was taking a while so I bought this one. Switching on it does the normal green power light then. . . The red and you guessed it it keeps blinking red (not solid) I work as a Chapain and just love making coffees for the school parents. the machine size is just fine for the demand. Has anyone found an answer. It seems to do everything else ok. I realise its a old post so please humor me. Chappy
                Working...
                X