If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
EM6910 collar replacement - leftover washers!!! Help please.
I was having leaks around my coffee handle that weren't fixed by a new blue seal. I pulled out the collar from the EM6910 according to the guide by wan (elsewhere on this forum) and gave it a clean. It actually looked alright so I put it back in. Five little washers fell out of the collar and I think they came from the 5 Torx screws on the collar but I can't work out where they go. I now have massive leaks around the handle. Has anyone done the exchange and know where they go?
Thanks!!
Hi Allison
No idea what WAN is...
Here is the complete service manual plus an annotated version of the collar replacement guide (kinda SB with extra comments, arrows etc). Hope it helps.
TampIt
PS: 90% of 6910 leaks can be fixed with a simple spacer... unless the collar is seriously worn. Wish I knew that earlier. I had a botched warranty job that turned into a nightmare, then found out I didn't need to replace the collar anyway!
EM6910 collar replacement - leftover washers!!! Help please.
I was having leaks around my coffee handle that weren't fixed by a new blue seal. I pulled out the collar from the EM6910 according to the guide by wan (elsewhere on this forum) and gave it a clean. It actually looked alright so I put it back in. Five little washers fell out of the collar and I think they came from the 5 Torx screws on the collar but I can't work out where they go. I now have massive leaks around the handle. Has anyone done the exchange and know where they go?
Leave a comment: