Today when I turned on the steam wand prior to stretching the milk I noticed that white milky steam was coming out. I know it is not milk in the boiler as I always make sure that steam is coming out the wand before and after stretching the milk. Water from the group and the hw tap were fine.
After running the steam for a few minutes it had reduced to almost nothing.
From memory the Giotto has a silicon tube inside the steam wand and I am wondering if that is the cause.
Machine is about 5 years old.
Any suggestions would be appreciated.
After running the steam for a few minutes it had reduced to almost nothing.
From memory the Giotto has a silicon tube inside the steam wand and I am wondering if that is the cause.
Machine is about 5 years old.
Any suggestions would be appreciated.

Comment