Announcement

Collapse
No announcement yet.

Help with my new Sunbeam 6910

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Help with my new Sunbeam 6910

    Pleasure Lynn - what Wushoes says is spot on. I would get much smaller amounts ground, and tell the person who does it to grind it for a commercial machine rather than a home espresso machine and you will find it easier to get a good shot. Typically they grind to coarse.

    Cheers

    Comment


    • #17
      Re: Help with my new Sunbeam 6910

      I thank you all for the advice, it has been a great help. I still havent had a chance to practice as yet. We have just moved house and I seem to be too busy to play with my coffee maker. But, I am definitely going to this week. I will let you know how I go.

      Best regards, Lynn.

      Comment


      • #18
        Re: Help with my new Sunbeam 6910

        [/QUOTE]
        You also need to put the rubber cleaning disk in the group head and press the manual button, wait until the pressure guage goes up and then press the manual button again. do this 3 or 4 times at the end of each coffee making session.[/QUOTE]

        That seems very keen, do you really use the disc after every session?

        Comment


        • #19
          Re: Help with my new Sunbeam 6910

          Originally posted by ozscott link=1182643733/15#15 date=1183268260
          Pleasure Lynn - what Wushoes says is spot on. I would get much smaller amounts ground, and tell the person who does it to grind it for a commercial machine rather than a home espresso machine and you will find it easier to get a good shot. Typically they grind to coarse.

          Cheers
          Dippy1, dont know where you are, but I have to fully support every thing said to date.... and then some.

          Fresh coffee grinds is the KEY. No more than 250g and if possible, from a place that freshly roasts.

          Unless you drink great deals of it your 1kg will be stale before you get 1/2 way through it at best.

          Comment


          • #20
            Re: Help with my new Sunbeam 6910

            Well, I think I will be throwing a lot of coffee away unfortunately. I certainly know better now. I am going to save for a grinder and then, watch out! Ill be away with the best of you, lol.
            I actually got about 2 or 3 mm of nice foam on my coffee last night (not my hubbys tho). So I am improving. This site is so great for us novices, I would have given up by now without you all helping me.

            Cheers to you All,
            Lynn.

            Comment


            • #21
              Re: Help with my new Sunbeam 6910

              You wil end up with much much more micro-foam than that Lynn...practice practice.

              Cheers

              Comment


              • #22
                Re: Help with my new Sunbeam 6910

                when I do get a grinder what is the best to compliment my coffee machine? I know even less about grinders than I do about machines, lol.

                Thanks, Lynn.

                Comment


                • #23
                  Re: Help with my new Sunbeam 6910

                  Originally posted by dippy1 link=1182643733/15#21 date=1183435672
                  when I do get a grinder what is the best to compliment my coffee machine? I know even less about grinders than I do about machines,

                  Thanks, Lynn.
                  Hi Lynn,

                  I know that we keep saying it, but the message is still the same.

                  Get the best grinder you can possibly afford for your machine.

                  Id consider an Iberital Challenge doserless as bare entry level but if you are truely serious about a great cup, you should be setting your sights at the Macap/Mazzer/Compak level. There are some intermediate steps as well. Bottom line is that if you buy well now, you have a grinder for life- and that will be a whole heap longer than the life of the Sunbeam :P

                  I spent more on my first grinder than I did on my first machine. At that stage, I didnt really know what I was doing but it turned out that the grinder was a Mazzer mini...purchased because I liked the look of it.

                  Please feel free to call for some unbiased advice if you think it will help....I call em as I see em ;-)

                  Good luck!

                  Chris

                  Comment


                  • #24
                    Re: Help with my new Sunbeam 6910

                    Just as a matter of interest Chris do you go for the Rockys (you didnt mention it specifically in your last post), or are you into stepless grinders only for espresso?

                    Cheers

                    Comment


                    • #25
                      Re: Help with my new Sunbeam 6910

                      Gday Scott,

                      I thought that I made myself pretty clear when I suggested that its a good idea to buy the best grinder you can afford. :-/

                      Whether that grinder is doser or doserless, stepped or stepless will depend on the price point where the budget is maxed and the requirements of the client. There are excellent stpped grinders (small steps).

                      If its bottom end, I suppose an Iberital Challenge doserless
                      If its $450, Id say Rocky doserless
                      Above $600- doser every time (I am not crazy on doserless at all)

                      Chris

                      Comment


                      • #26
                        Re: Help with my new Sunbeam 6910

                        Cheers Chris - you were clear, but you jumped from Iberital to well over Rocky from what I could tell, hence my Q.

                        Cheers mate.

                        Comment


                        • #27
                          Re: Help with my new Sunbeam 6910

                          wow, thanks for the info. looks like I will be saving a bit longer.

                          Regards Lynn.

                          Comment

                          Working...
                          X