Announcement

Collapse
No announcement yet.

Where to find an EM7000 internal steam hose replacement?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • level3ninja
    replied
    I doubt you'll be able to buy the exact part you want as a new spare part. Sunbeam are moving away from supplying spares or having machines repaired at all. The brass component should be able to be reused. The tube is standard PTFE 4.00mm OD, 2.0mm ID tubing.

    Leave a comment:


  • Kallikak
    started a topic Where to find an EM7000 internal steam hose replacement?

    Where to find an EM7000 internal steam hose replacement?

    Hello,

    The other day it seemed my EM7000 let out a great bang just as it started up, but I was puzzled since there was no electrical or burn smell, and it appeared to be working just fine.

    Just when I'd decided it must have been a bird crashing into the nearby window I discovered that the steam wand was not working. Pulling it apart revealed that the internal hose that connected the steam pump to the adjusting control had burst.

    Seems a pretty straightforward replacement, but I haven't been able to find the part. Can someone suggest where I can get a replacement hose and associated little brass component?

    Thanks,

    Ken
    Last edited by Kallikak; 20 October 2020, 03:16 PM.
Working...
X