Hey all,
Had a problem pop up with my dual boiler recently.
When I pulled a shot the pressure wasn't building past 6psi. So I cleaned the machine a couple of times and backwashed it and the problem got worse, and it didn't go past 2 psi. Strange thing is when I put the silicone cleaning disk in the single basket and do the clean or backwash the pressure goes easily to 10 psi, as soon as I use coffee it does not go past 2 psi.
I have my Breville smart grinder on the finest setting and that makes no help at all. I then thought the grinder might be the problem, so I took grinder apart as much as I could and cleaned it out thoroughly and tried again. Still only got 2 psi when I pulled the shot.
Any suggestions?
Had a problem pop up with my dual boiler recently.
When I pulled a shot the pressure wasn't building past 6psi. So I cleaned the machine a couple of times and backwashed it and the problem got worse, and it didn't go past 2 psi. Strange thing is when I put the silicone cleaning disk in the single basket and do the clean or backwash the pressure goes easily to 10 psi, as soon as I use coffee it does not go past 2 psi.
I have my Breville smart grinder on the finest setting and that makes no help at all. I then thought the grinder might be the problem, so I took grinder apart as much as I could and cleaned it out thoroughly and tried again. Still only got 2 psi when I pulled the shot.
Any suggestions?


Comment