Announcement

Collapse
No announcement yet.

EM 6910 steam pump repairs?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rawill
    replied
    Originally posted by Billy-o View Post
    hi Rawill,
    was replacing the steam pump a hassle? I've got a very old (2010) EM6910 that I lovingly repaired for ages and the steam pump going was my sign to get a new machine - a more recent version of the EM6910 which I've been fairly unsatisfied with. Maybe I should replace the steam pump on the old one!
    Any tips and advice appreciated!
    Very old EM6910 models are the ones to have.
    I have some old ones, and a newer one with old internals, especially the steam thermoblock, which I am told produces better steam.

    In practice that seems to be true.

    I estimate one machine I have has done over 10,000 shots.

    Leave a comment:


  • rawill
    replied
    So sorry. Never got a note to say I had a post to reply to.

    No, once you get the relevant covers off, quite easy to replace.

    I have done a couple now.
    Last steam pump I bought was from AliExpress, just for fun

    Leave a comment:


  • Jackster
    replied
    Easy to replace.
    Run the vinegar solution through the steam circuit for ages (10min or more) till the steam is powering.

    Leave a comment:


  • Billy-o
    replied
    hi Rawill,
    was replacing the steam pump a hassle? I've got a very old (2010) EM6910 that I lovingly repaired for ages and the steam pump going was my sign to get a new machine - a more recent version of the EM6910 which I've been fairly unsatisfied with. Maybe I should replace the steam pump on the old one!
    Any tips and advice appreciated!

    Leave a comment:


  • Jackster
    replied
    I have had no success with them. Other than swapping coils.
    Maybe if it's possible to get the sealing ball at the one way valve, it's possible to rebuild them....

    Leave a comment:


  • rawill
    started a topic EM 6910 steam pump repairs?

    EM 6910 steam pump repairs?

    I have just replaced a steam pump on my old trusty, very early 6910.

    I am wondering, can the old steam pump I took out be ressurrected?

    They seem very simple, a few seals and a winding, reason, I have another machine here where the steam pump takes an age to "wake up" once your turn the control knob, takes forever to start pumping.

    I cant move it on to anyone in that condition.

    Robin
Working...
X