Announcement

Collapse
No announcement yet.

BES920 Breville pressure where did it go

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • level3ninja
    replied
    Could also be the OPV. They're cheap to replace. If it's the OPV there will be water being sent back into the water tank while you're pulling a shot, you can tell this is the case if the surface of the water in the window at the front of the tank is rippling.

    Leave a comment:


  • artman
    replied
    Do you get decent flow through the group without a PF ? Could be the pump piston / valves a bit sticky/stuck from sitting around? Could just be scale / blockage at the solenoid. The water holes are tiny. What pressure do you get if you use the blind? Cheers

    Leave a comment:


  • shugaswete
    started a topic BES920 Breville pressure where did it go

    BES920 Breville pressure where did it go

    Breville double boiler 5 years old, left it unused about 9 months, tried to make a cup and the pressure is now too small to push through grinds.

    Pls would like to know, have I made a mistaken by letting it sit unused, and can this be repaired and is it worth it.

    Estimate this machine has made only around 300-400 extractions in total.

    I only used it here and there, but then as said left unused for a longer period. (Why did I have a feeling this would happen?)

    thanks,
Working...
X