Announcement
Collapse
No announcement yet.
Breville BES920 Help Needed
Collapse
X
-
Ok if it's not filling forget the element. Is the pump working? Sounds like not, or like there is an air lock etc. How old is the pump? Can you fill the line with water to see if it can pump then?
- Flag
-
It's the pump for the steam boiler (I think) you can pull a shot at the pump for that kicks on and off for that. What's the best way to test the element, I assume it's not going to coome on whilst the boiler it is empty.
- Flag
Leave a comment:
-
Breville BES920 Help Needed
I'll try to keep this as short as possible.
I am having issues with the steam boiler not filling up, err2 coming up, and the pump running continuously. The codes it is throwing are 01 and 11.
I have recently replaced the thermal fuse on the side of the steam boiler and the Triac board.
It all started with me thinking I would give my new (to me) machine a descale, hours of googling later and I have learned the error of my ways. I have tried all the tricks to try and get the boiler to refill (Disconnect the probes/clean the probes/reset) but it still isn't actually filling.
Any help as to what and how I should be checking would be much appreciated.

Leave a comment: