Announcement

Collapse
No announcement yet.

Sunbeam EM7000 Panel Light Flashing!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sunbeam EM7000 Panel Light Flashing!

    Hi Guys,

    Please help me my fabulous EM7000 that I bought in 2013 stopped making steam even though the pump was still working. I purchased a new steam thermoblock, and steam pump including the fuse and thermostat. Also purchased a new coffee pump I figured that these would be tired and needed replacement as they were showing rust and some scaling. I replaced the pumps and the steam thermoblock including the thermostat however didn't install the thermal fuse.

    Tested the machine the pumps worked fine, however, the new steam thermoblock didn't heat up! Next, I installed the new thermal fuse and the steam thermoblock heated up yay!

    So, now the panel light keeps flashing, both thermoblocks heat up which is great, however, to my dismay both pumps stopped working OMG. rechecked all my wiring as per the photos I had taken prior to installing the new parts all good. I tried another NEW thermal fuse without success.

    I have noted some conversation about the relays on the PCB could be the issue not sure why they would fault given all was working fine prior to changing the thermal fuse, can someone help me, thanks in advance.​

  • #2
    Hi Patty, I have a similar issue, i have a used machine that the fuse has continuity but the thermoblock doesnt heat up, so now about to look at the relay, even though it pumps ok. No heat. I may replace the fuse and see if that makes a difference.

    Comment

    Working...
    X